Reamer Exchange Thread? (Reamer bank) & other tools barrel / action wrenches & vices

[don beasley]

Remove

Buy or rent 9.3x72R reamer


it would be used only by a professional for one job

thanks

don

 

[Schecter 81]

***

 

[hexbasher]

Looking to rent a Remington Choke reamer and Tap. 12g

 

[Mikeyman]

Looking to buy / rent / borrow a 357 maximum reamer (for a handi rifle in 357 mag.)

 

[superted]

Somewhere I saw the name/contact for the PT&G "rep" in Canada (think it was in BC) I'm needing a 38-40 chamber reamer? anyone can help out? Please?

 

[double gun]

why not order direct?

 

[hunter5425]

Somewhere I saw the name/contact for the PT&G "rep" in Canada (think it was in BC) I'm needing a 38-40 chamber reamer? anyone can help out? Please?

I think your looking for Gary Eakin at thereamerguy@yahoo.ca . I believe he handles Manson reamers now which are of more dependable quality than PT&G IMHO. bus duble gun mentioned you can order direct,

 

[superted]

Thanks "double gun" and "hunter5425". "Ordering direct" - years ago ordered a WCF 40-82 chamber reamer for an 1886 I was relining dct from PT&G - an absolute GONG SHOW - sent the specs from "The Handloaders Manual of Cartridge Conversions" AND a dummy round from my RCBS loading die. After a PAINFULLY long time reamer arrived and reamed a sample chamber on a liner stub. Dummy round wouldn't chamber. Called PT&G - no one would take responsibility. Wrote registered "snotgram" - got a response "it wasn't our fault but send it back" (at my expense) Bottom line ... on THIRD ATTEMPT finally it worked. Main problem was no ONE person to talk to and it was always "someone else's" fault...
All my work is in restoring/relining old Winchester lever guns 73's, 1886, 1892 and 1894's (no post 94's grrrr)
You guys are welcome to borrow my chamber reamers (if you're into this stuff)
PTG 40-82 WCF fini Removeable Pilot
PTG 30-30 WCF fini RP
Manson .30 cal throater
Clymer 44-40 fini Solid Pilot
No name 44-40 fini SP
Manson 32-20 fini SP
PTG 25-20 fini RP
PTG 32-40 fini RP
Clymer .38 Super Nonte SP (used to remove ridges in factory chambers causing extraction problems when dirty in IPSC raceguns.
Brownells Muzzle/Cylinder Facing/Chamfering Tool set with multi brass pilots!

Thanks guys for your input - I live in Calgary - will give Gary a shout!

 

[double gun]

I quit using ptg for reasons similar to yours. They make too many mistakes and the company is brutal to deal with. That said, manson is my go to company now, and You won't have the same issues. JGS is excellent aswell.

 

[superted]

thanks again for your input "double gun" and "hunter5425"

 

[Levon12345]

Looking to buy / rent / borrow a 357 maximum reamer (for a handi rifle in 357 mag.)

I too would like to buy/rent/borrow a 357 maximum reamer. Is there one floating out there?

 

[tjsudbury]

I'm looking to beg, borrow or steal a 22-250 finish reamer.

 

[tjsudbury]

I'm looking to beg, borrow or steal a 22-250 finish reamer.

still looking

 

[drift1122]

Anyone have a barrel recrowning tool for 303 British?

 

[ssapach]

Anyone have a 303 British reamer with a pilot in the range of 0.2990" - 0.2995"?

I'm also open for suggestions on the best place to find such a thing, I'm willing to buy brand new.

 

[mudpro]

Looking for a 7-300wsm reamer.

 

[Johnnyoneshot]

Need a 280AI Reamer any around

Thx

 

[archie_james_c]

Looking for...

22-250 AI
7-08 AI

Prefer short/no throats

Have to lend/trade...
SAAMI .260 REM
SAAMI 7MM WSM

 

[Alpheus]

Looking for someone with a Savage barrel nut wrench in Edmonton.

 

[drift1122]

Looking for savage smooth barrel nut wrench, 308 reamer and 308 go-no go gauge. Also anyone know what is the thickest barrel I can use on a savage action?