10/22 photos - post 'em up here!

[elimsprint]

Well I think you will really appreciate the nice long barrel on this one ....








I just put a newly modified and bed-linered stock on my "Pocket Rifle" SBR project:

http://www.canadiangunnutz.com/forum/showthread.php/1134581-Low-Budget-10-22-quot-Pocket-Rifle-quot-SBR-Project

Nice job on the stock.

 

[Tom E Gun]

Thanks Elimsprint!

 

[YouAreInOilCountry]

A couple people asked me about accuracy of my Ruger 10/22 with a heavy barrel. By no means am I a marksman... but here's what I managed today with a strong wind down range.

The 1st target was shot at about 25 yards. The 2nd target was about 50 yards. On the first target, absolutely, the two outliers are my fault. Ten rounds in each target.

I shot with the bi pod of the gun on the table... a rest would have been better I suppose.
Anyways, I'm pleased with the results. Absolutely, there are more accurate .22 rifles. I used Federal bulk ammo.

Again, make no mistake, there are far more accurate .22's at longer distances than this 10/22 set up. I like it because it is stable and easy to shoot. The Kidd match trigger is a thing of beauty.

Ruger 10/22 .22 caliber rifle
Hogue Rubber Overmoulded Stock
Green Mountain 18" Stainless, Fluted .920 Bull Barrel
Kidd Bolt Handle
Kidd 10/22 Match Trigger
Hawke Varmint 6-24 x 44 Scope
Little bit that's left on it, not mentioned, is Ruger.

 

[Ser]

Those are really nice firearms is the blue and black one a Remington

 

[Rapier46]

Testing out the new barrel and stock. Love the stock and cant go wrong with the tacsol barrel. Pup was spotting for me.

 

[Cirrus8]

Heres mine, might make the handguard shorter. Its a 12,5 barrel with a 3 1/2 inch extention.

 

[4307]

The latest build is complete, a 10/22 "Space Gun":

I'm diggin this build. Looks cool! Any more details on the build? How long is that barrel?

 

[OneInTheChamber]

Auto bolt stop? Is that the same as last shot hold open

 

[JD22-250]

Magnum Research receiver/bolt/charger and carbon fibre wrapped barrel, Boyd's stock, Timney trigger group, Volquartsen firing pin, spring and extractor, Tuffer Buffer and Bushnell Elite 6-24x

How'd you get the bx-25 mag. Almost looks pinned in the front in the one pic. Jealous

 

[icedragonmx]

VQ Fusion in 22lr

 

[Mr. Friendly]

The latest build is complete, a 10/22 "Space Gun":

I really dig the pistol grip. avail commercially or was that a hand made?

 

[TargetGuy]

Well I built almost this exact thing a few years back. Stupid me, I sold it to fund something else.... Well I had to build it again. Only better.





Shoots pretty damn good, better than I can anyways.

 

[hoytcanon]

DAR22/KIDD BUILD;

- Dlask DAR22 Receiver
- Dlask Machined Bolt & V-Block
- Rimfire Technologies Charging Handle
- Kidd Ultralight 16" barrel
- Kidd Single Stage Trigger Group
- Boyd's Rimfire Hunter Walnut stock
- Leupold VX 4-12X40mm

 

[North60]

DAR22/KIDD BUILD;

- Dlask DAR22 Receiver
- Dlask Machined Bolt & V-Block
- Rimfire Technologies Charging Handle
- Kidd Ultralight 16" barrel
- Kidd Single Stage Trigger Group
- Boyd's Rimfire Hunter Walnut stock
- Leupold VX 4-12X40mm

Nice Build, that stock really tops it off!

 

[Sqr]

With a Nordic Components receiver.

Next to the real deal an Armalite.

 

[Tom E Gun]

I don't think I ever got around to posting a pick of my most recent DAR-22 build:
This was assembled from 100% lightly used parts raided from various used rifles I acquired on the EE:

Dlask receiver, Green Mountain barrel, all other internal parts are Kidd.

 

[LeadMonkey]

I don't think I ever got around to posting a pick of my most recent DAR-22 build:
This was assembled from 100% lightly used parts raided from various used rifles I acquired on the EE:

Dlask receiver, Green Mountain barrel, all other internal parts are Kidd.

Pretty Sick TEG!

 

[elimsprint]

I don't think I ever got around to posting a pick of my most recent DAR-22 build:
This was assembled from 100% lightly used parts raided from various used rifles I acquired on the EE:

Dlask receiver, Green Mountain barrel, all other internal parts are Kidd.

How's it shoot? As if I didn't know, lol.

 

[Tom E Gun]

How's it shoot? As if I didn't know, lol.

Shot last weekend at elimsprint's backyard range, 5 rounds, distance was 53 yds, circles on target are 1/4" apart, ammo is SK Rifle Match:

 

[elimsprint]

Cheater, using all that expensive ammo