I bought an used T-97 yesterday, It came with the user manual which I took the time to read even if I already had a pretty good idea how to operate/disassemble the rifle from the research I done before buying. In my opinion, nothing in that manual was very useful, it's poorly translated ( google translate style ) and it's all very generic things: safety rules like to never point at "non-target objects", never load a rifle where you are not suppose to shoot, use the right cartridges, wear ears and eyes protections, ensure there's no barrel obstruction...do not drink alcohol while using the rifle...
So at page 6, useful information in the manual -> T97NSR uses 5.56x45mm Type SS109, Type M193 ammo "may be use when necessary". It is gas operated rotating bolt, barrel length is >= 470mm, total length is <=760mm, firing mode is single shots (I'm typing most info as is straight from the manual
) weight with one empty mag is <= 3.9Kg, aiming is "mechanical sight" and feeding device is magazine of 5 rounds.
Page 6 contain a drawn exploded view, better exploded view available online (
http://www.t97.ca/images/pictorial/2.JPG or
http://www.thefirearmblog.com/blog/wp-content/uploads/2013/11/T97_exploded_diagram.jpg )
From page 7 to page 12: Operating procedure, basically how to set the safety lever, remove and insert a mag, set the sight ( position 1 = 100m, position 3 = 300m and position 5 = 500m), feed a round using the charging handle...
From page 13 to page 19: disassembly, using IKEA style line drawing, I found better instruction on youtube.
Page 20 and 21, reassembly: follow disassembly in revers order, maintenance, clean the rifle after each use or every 6 months using quality oil, don't use to much oil, below 0 Celsius consider dry lubrican, store with the hammer in the fired position, don't try to modify the gun cause it void the warranty.
So, all of this should be either essential safety procedure ( leaned form CFSC ), known good practice ( usual maintenance of any firearm ), easily available instructions ( online video for disassembly/basic operations ). Nothing in that manual is beyond that, but if you really want I could try to scan it but it would waist your time as well as mine
