Black Rifle Shooters, We Want To Hear From You! (No, Seriously We Really Do!)

FyreFighter said:
NATO surplus ammo at a reasonable price.
Reasonably priced shipping that doesn't take more than a week to get across the country.
A puppy, maybe a unicorn.
Click to expand...

If you can suggest a courier that isn't bound by the new transport Canada regulations and rates for shipping dangerous goods we would certainly be interested in talking to them.
We don't set the rates and as for delivery time, we have no control on that as well.

I'd love to be able to find some reasonably priced nato surplus....I'd fill my own basement :evil:
 
Hey, you asked what we wanted. I didn't know this was the "grumpy tells you why it ain't going to happen" thread.

Is that a no on the puppy?

FF
 
FyreFighter said:
Hey, you asked what we wanted. I didn't know this was the "grumpy tells you why it ain't going to happen" thread.

Is that a no on the puppy?

FF
Click to expand...

Hey I can get you a puppy....what type?

I asked for input on products or accessories, shipping doesn't fall into that area

I'm just setting the expectation level on things, as obviously there are some things no matter how hard we all wish for aren't going to happen because they are beyond our control.
Shipping etc is something we have no control over.
 
We get you can't work miracles, but your choice of shipper is absolutely within your control. That they all suck is kind of a bad deal for all concerned.

My point is pretty simple: I don't want a fancy accessory or high end super duper doodad to attach to a quad rail: I want the best value on the stuff I use the most, most often.

As for puppies, I want this one:

gun_dog.jpg
 
You know what I have not seen much of? American made 14.5" M4 Uppers. Those are not very common. The ones with the front sight post and the M203 cut on the barrel. The Norcs are as close to the M4 clone as they get but..... you know how the quality is compared to American made AR's.
 
budget AR parts.. BCG, and barrels.. I don't shoot big $$ guns, I shoot inexpensive guns A LOT!! :)

I like $150 BCG and barrels (maybe I'll spend $250 on a barrel).. I am not cheap, just tight for $ and prefer to spend it on ammo.. Also building an AR is so hard to justify with the price of basic parts.. I would welcome any deals or packages :)
 
Last edited:
Grumpy Wolverine said:
Take a look at the price of those and then add 25% and see if they still seem so attractive for a chassis system. We can put you into a folding stocked AI AX AICS chassis for way less.
Click to expand...

I had the chance to play with many of your fine AI toys and do have several chassis systems already ;) This is the only chassis I know of that has the hinge so close to the rear of the action which allows for the OAL to remain the same with an extra 2" of barrel when folded. I did the math on the extra 25% exchange and taxes on top. I normally pick out the stuff that works for me. Can you bring them into Canada? Also very happy to see that you have GSCI night vision listed on your site! :)

And a little extra AI #### with an "almost too close moment" of a buddy in your back yard...50 Cal with S&B goodness!

 
Last edited:
icedragonmx said:
I had the chance to play with many of your fine AI toys and do have several chassis systems already ;) This is the only chassis I know of that has the hinge so close to the rear of the action which allows for the OAL to remain the same with an extra 2" of barrel when folded. I did the math on the extra 25% exchange and taxes on top. I normally pick out the stuff that works for me. Can you bring them into Canada? Also very happy to see that you have GSCI night vision listed on your site! :)

And a little extra AI #### with an "almost too close moment" of a buddy in your back yard...50 Cal with S&B goodness!

Click to expand...

I will check into and let you know for sure.
 
bobbynewmark said:
budget AR parts.. BCG, and barrels.. I don't shoot big $$ guns, I shoot inexpensive guns A LOT!! :)

I like $150 BCG and barrels (maybe I'll spend $250 on a barrel).. I am not cheap, just tight for $ and prefer to spend it on ammo.. Also building an AR is so hard to justify with the price of basic parts.. I would welcome any deals or packages :)
Click to expand...

i know right? cheapest BCG i have found is a NEA at $179.99
 
AK-74 style muzzle brake,threaded for the vz-58. 14x1rh, I've found tons of others looking for them, and no one sells them. I've been looking for weeks. I will order one the second I find one. (Saying of course it's not $200 or something ridiculously priced like that.)
 
BCGs, AR10 barrels, muzzle brakes (Alamo or American Precision Arms), Geissele triggers, rails, Harris Bipods, folding tritium sights. Spare spring/pin/plunger set.

I'd love an affordable, think Rainier or AeroPrecision 18.6" or 20" stainless .308 barrel. Maybe, just maybe, sometime in the next 10 years that 18.6" might mean my gun goes non-restricted.

Ambidextrous parts (safeties, mag releases, bolt hold open devices)

Oh, and American Rifle Company actions!
 
jeff211 said:
You have anymore DDM4V11 pro's in stock? cant even find them on your website anymore.
Click to expand...

Got more on order, they sold out fast, won't see more until roughly first week in sept, maybe a little earlier, and with the demand in the US we might not get as many as we are hoping on that shipment. If you would like one, email us and get your name down for one.
 
icedragonmx said:
Thanks so much! I feel another build starting! ;)
Click to expand...

I'm still waiting to hear back from Eberlestock as to whether their chassis are licenced for export or not but here are some rough pricing.

The Stealth Folding Slick chassis will be $2508.00 plus tax and shipping.
The Stealth Folding Perf-Mnt will be $2759.00 plus tax and shipping.
We are waiting on the confirmation of our costs etc as well but this should give you an idea.
 
You must log in or register to reply here.
Back
Top Bottom