DAR-22 80% Receivers @ Dlask Arms

[Dlask Arms]

We got 3 of these receivers from a customer that just didn't think he would ever have the time to finish them. Get them now, we are not making them anymore so this is it.


http://dlaskarms.com/products/dlask-arms-dar-22-80-receivers-6061-t6-aluminum



Leigh
Dlask Arms Corp.

 

[Adammeek]

What makes it 80% ?
Thanks adam

 

[Dlask Arms]

What makes it 80% ?
Thanks adam

20% needs to be completed. (Pictures are on the website)



Leigh
Dlask Arms Corp.

 

[Adammeek]

Lol.. Ok what 20% and how do I get that finished?

 

[Adammeek]

There is very minimum description of what is missing or incomplete on website

 

[Phat Eagle]

Lol.. Ok what 20% and how do I get that finished?

Basically there is a bit of machining to be done... Think of the holes for the mag release, trigger, etc. You usually buy a jig set and either use a milling machine or drill press to do the rest. Once they're done they have to be turned in for certification and registration.

 

[burnt_servo]

does a non restricted need to be turned in ?

 

[laurencen]

the picture shows a upper, are these 3 lowers?

 

[Phat Eagle]

does a non restricted need to be turned in ?

Not sure... I didn't realize it was the DAR22... Thought was AR!

 

[crankj11]

No....you were right the first time........the liberals will want them turned in.......to scrap metal.

 

[Petrock]

I'm using my phone and couldn't find the jig for these. Is the jig still available and how much?

I'd love to grab all three!

 

[tiriaq]

From the photos, the holes for the two pins which secure the trigger mechanism housing need to be drilled and reamed. The hole for the barrel is undersized. It will need to be opened out. This would be more challenging than the trigger housing pin holes.

 

[thatguymoses]

Ordered...
Should be easy enough on a Bridgeport.
B)

Going to have to dig out the powdercoat machine.

 

[bungsTPS]

Are these coming back?