10/22 photos - post 'em up here!
- Thread starter mchaley
- Start date
TV-PressPass
CGN Ultra frequent flyer
- Location
- Mountains, Alberta
The law states 660mm, so 26" overall length!
Tacticooooooool...had to make whip up another 10/22, this time in Archangel 556R. Shown in comparison to the ATI AR22 and Archangel Nomad. No clue how the 556R feels yet as I just finished assembling tonight.
And for those interested, the optics on the 556R are the finest, cheapest replica optics produced by Shenzhen, China. Let's not get too crazy here... this is still a .22 in the end.
And for those interested, the optics on the 556R are the finest, cheapest replica optics produced by Shenzhen, China. Let's not get too crazy here... this is still a .22 in the end.
Finished my latest build. It's an early 80's receiver and metal trigger group with a Ruger sporter deluxe stock and an 18" Clark customs 18" standard profile barrel. I haven't gotten too carried away with this one as the trigger is worn in quite nice from being so old lol I may add a PWS T3 mag release though as I love them and the way they work. It's also sporting a Nikon prostaff rimfire 4-12x.
This ones quite different from my other shorter heavy barrelled 10/22's but I like it, it's a little more "classic"
This ones quite different from my other shorter heavy barrelled 10/22's but I like it, it's a little more "classic"
Here are mine.
Ive had quite a few 10/22 configurations over the years, Ive tried the tapco, target barrels, Krinker plinker, Hogue, Dlask heavy and short barrel, ATI stocks, choate, Arch Angel etc. and I found I like more or less factory with a few of my own mods. By the way I always buy used so I don't lose money.
I also have a few butler creek mags but I rarely use them as nothing works better than factory tens. The more I shoot 10/22 the more I find I like a traditional rifle versus all the bells and whistles in the end its still a rimfire. I have a couple extra wood stocks, one for the wife and one to cut down when the boy is old enough.
The one on top is my "Tactcool" entry with 16" OEM barrel, scope in weaver rings that is quickly removable for Williams fire sights with Choate handguard and no name muzzle protector.
Second one is my baby. International model with Williams peep and interchangeable globe front sight. Its a tack driver at 25 yards, further out not so much but a lot of fun.
The triggers are lightened and yes the bolt releases are un altered. I like that newbies cant work my rifles....lol. Also I actually prefer the flush fit release, the mag is so it might as well be too.
Ive had quite a few 10/22 configurations over the years, Ive tried the tapco, target barrels, Krinker plinker, Hogue, Dlask heavy and short barrel, ATI stocks, choate, Arch Angel etc. and I found I like more or less factory with a few of my own mods. By the way I always buy used so I don't lose money.
I also have a few butler creek mags but I rarely use them as nothing works better than factory tens. The more I shoot 10/22 the more I find I like a traditional rifle versus all the bells and whistles in the end its still a rimfire. I have a couple extra wood stocks, one for the wife and one to cut down when the boy is old enough.
The one on top is my "Tactcool" entry with 16" OEM barrel, scope in weaver rings that is quickly removable for Williams fire sights with Choate handguard and no name muzzle protector.
Second one is my baby. International model with Williams peep and interchangeable globe front sight. Its a tack driver at 25 yards, further out not so much but a lot of fun.
The triggers are lightened and yes the bolt releases are un altered. I like that newbies cant work my rifles....lol. Also I actually prefer the flush fit release, the mag is so it might as well be too.
Last edited:
A2 Flash Hider with Dlask 11" SR22 barrel on the 556R. OAL when collapsed is 27". I could have looked for a 10" Charger barrel but it's bloody impossible to find. When I was doing up a mock with measurements I wasn't too sure if the threads on the flash hider would eat up 0.5" off the OAL but it looked to be the case. I'll post a pic with the measuring tape later on tonight.
- Location
- Richmond, BC
http://4.bp.########.com/-FqQwWNToIoI/Vja1K05ilUI/AAAAAAAAY-o/-4YgNWHIz-E/s1600/DSC_0924.JPG
http://2.bp.########.com/-vOXh_8iuKg8/Vja1LTLi0gI/AAAAAAAAY-w/2F--YY6yeqQ/s1600/DSC_0925.JPG
http://1.bp.########.com/-ICZ9Da-6cJA/Vja1LAwkzGI/AAAAAAAAY-s/4DsgupJ1Y-U/s1600/DSC_0931.JPG
http://2.bp.########.com/-3WQ70oeZc5E/Vja1SQ4s_8I/AAAAAAAAY-8/FiujpEaCweU/s1600/DSC_0932.JPG
http://2.bp.########.com/-vOXh_8iuKg8/Vja1LTLi0gI/AAAAAAAAY-w/2F--YY6yeqQ/s1600/DSC_0925.JPG
http://1.bp.########.com/-ICZ9Da-6cJA/Vja1LAwkzGI/AAAAAAAAY-s/4DsgupJ1Y-U/s1600/DSC_0931.JPG
http://2.bp.########.com/-3WQ70oeZc5E/Vja1SQ4s_8I/AAAAAAAAY-8/FiujpEaCweU/s1600/DSC_0932.JPG
elimsprint
CGN Ultra frequent flyer
- Location
- Kelowna, BC
Updated pic of my 10/22 with 8" Dlask barrel, XB5, and brand-new See-All Open Sight:
(sorry that its a crappy cell phone pic)
Where did you get the See All? How do you like it or have you tried it yet? I think I have to try one.
thing of beauty, didn't know the magpul stocks are out. How does she shoot ? I may have a new project ! lol
If magpul made something like this for my 17 id be all over it.
Last edited:
Questar has been bringing them in. They sell out fast, so just put in another pre-order and wait about 3-4 weeks.
