***New to Canada*** SAP6 MAG-FED FLAT-TOP 11.4" 12GA Shotgun **NON-RESTRICTED**

got my 11 mag round and today and pump handle with rail today.

everything looks awesome.

TI, just wondering if you have an instruction manual for changing the pump handle?

Thanks!
 
zero95teen said:
got my 11 mag round and today and pump handle with rail today.

everything looks awesome.

TI, just wondering if you have an instruction manual for changing the pump handle?

Thanks!
Click to expand...

1. Remove stock.
2. Remove cap on end of pump.
3. Remove screw on rear of receiver holding rail on.
4. Pump half way back and remove bbl. If rail is stuck on receiver you may need to use a brass punch to "help" it off.
5. Remove the 2 pins holding the trigger group in.
6. Remove trigger group. Make sure hammer is cocked or the hammer spring and keeper will go flying. Don't ask me how I know.
7. Pull the pump forward and remove pump handle, rail and bolt.
8. Pump handle pulls off the pump rail and put on your new one.
9. Assemble in reverse order.

I've had a couple people PM me about it, so I thought I'd post this up.
 
So a Master Key Shotgun is legal? If so this is the best day ever...always thought it was illegal?? Do we have 100% confirmation it's legal?
 
Got my Sap6 yesterday.. Took it for a quick test fire today. Have to say I'm pretty impressed with it. Ran 72 rounds of Dominion low recoils slugs through it without a hikcup. I was really surprised at how low the recoil is, granted low recoil slugs but same ammo in my 14" 590A1 is much more noticeable. Put a TRS25 on top and at 25 yards had a solid 2" group standing unsupported without really trying. Feed and cycles perfectly.

I bought two extra mags with it and was wondering if anyone has noticed the difference in the followers. Not sure which two were with the gun and which two were extra add on's. Two fit and lock in really smooth and two are much stiffer to insert and lock in. I'll take some pics of the difference with the followers. Regardless, all the mags run perfect and I'm sure the stiffer ones will get broken in. All in all very happy with the shotgun. If anyone is on the fence, I would recommend grabbing one. Great hiking, canoeing shotgun.
 
Any got a picture of standard shotgun stock(non pistol grip) and the 14inch barrel? Would love to see some good pictures of that set up.
 
Outcast said:
Got my Sap6 yesterday.. Took it for a quick test fire today. Have to say I'm pretty impressed with it. Ran 72 rounds of Dominion low recoils slugs through it without a hikcup. I was really surprised at how low the recoil is, granted low recoil slugs but same ammo in my 14" 590A1 is much more noticeable. Put a TRS25 on top and at 25 yards had a solid 2" group standing unsupported without really trying. Feed and cycles perfectly.

I bought two extra mags with it and was wondering if anyone has noticed the difference in the followers. Not sure which two were with the gun and which two were extra add on's. Two fit and lock in really smooth and two are much stiffer to insert and lock in. I'll take some pics of the difference with the followers. Regardless, all the mags run perfect and I'm sure the stiffer ones will get broken in. All in all very happy with the shotgun. If anyone is on the fence, I would recommend grabbing one. Great hiking, canoeing shotgun.
Click to expand...

Thanks for your feedback!
 
MBaker said:
So a Master Key Shotgun is legal? If so this is the best day ever...always thought it was illegal?? Do we have 100% confirmation it's legal?
Click to expand...

Heard that it is, the rest of the gun it's being attached to acts as the stock. Might want to double check though as this is just word of mouth.
 
Just received mine and out to the range last night. Ran flawlessly, small and large mags and mix of different shells from different suppliers. Impressed by how it handles. Mags are a little stiff but it's new. Will see how it holds up. Much better than the UTAS that I had. Next up to test will be the 18 inch barrel and chokes. Thanks T. I.
 
I remember I read it somewhere (may be on the other thread) that upgrade is available for the improved safety and the new manual for existing owner, how do you do it ? send it back to you or contact the manufacturer directly ? thank so much.
 
roleicax said:
I remember I read it somewhere (may be on the other thread) that upgrade is available for the improved safety and the new manual for existing owner, how do you do it ? send it back to you or contact the manufacturer directly ? thank so much.
Click to expand...

Just send us an email with your address details and we'll have them sent your way
 
Beav said:
Just received mine and out to the range last night. Ran flawlessly, small and large mags and mix of different shells from different suppliers. Impressed by how it handles. Mags are a little stiff but it's new. Will see how it holds up. Much better than the UTAS that I had. Next up to test will be the 18 inch barrel and chokes. Thanks T. I.
Click to expand...

Thanks for the review!
 
diablo_man said:
Any got a picture of standard shotgun stock(non pistol grip) and the 14inch barrel? Would love to see some good pictures of that set up.
Click to expand...

Ask and ye shall recieve . . . many months later . . .

22989282956_e865886c00_c.jpg


23015320615_b8942cd1f3_c.jpg
 
You must log in or register to reply here.
Back
Top Bottom