Magwedge Aluminium Picatinny Rail for DA Grizzly

[Canada Ammo]

Canadaammo.com now have Magwedge Aluminium Rails for the DA Grizzly.

Both low and high mounts available to attached picatinny compatible optics onto your DA Grizzly shotgun.

 

[Astute Observer]

Will these rails fit on grizzlies with or without the ghost ring rear sight? Are the bead sight shotguns' receivers tapped to fit these rails?

Thanks...

 

[CanAm]

Will these rails fit on grizzlies with or without the ghost ring rear sight? Are the bead sight shotguns' receivers tapped to fit these rails?

Thanks...

Some are tapped, but not all. The holes for the rails and the holes for the GR sight are not the same

 

[Astute Observer]

Some are tapped, but not all. The holes for the rails and the holes for the GR sight are not the same

Are these ones tapped?
https://www.canadaammo.com/product/detail/dominion-arms-grizzly-shotgun-12-5/

 

[CanAm]

Are these ones tapped?
https://www.canadaammo.com/product/detail/dominion-arms-grizzly-shotgun-12-5/

Yes, the ones we have in stock are

 

[Poznan]

Will this fit on my 870 express?
i have a 14" barrel with a front side blade.

 

[CanAm]

Will this fit on my 870 express?
i have a 14" barrel with a front side blade.

As I said in my email 30s ago:

I don't know, as they were made to fit the three holes in the grizzly

 

[BabySeal]

They will not fit a Remington 870. I bought a Mesa rail for the 870 and it's 4 holes wouldn't line up with the three holes on my griz.

 

[Repper]

Is the short for bead sights and the tall for ghost ring?

 

[Canada Ammo]

Is the short for bead sights and the tall for ghost ring?

Yes this will work.

 

[Poznan]

Ah k i was planning on getting it drilled and tapped on my 870 receiver anyways. Cheaper then buying a rear ghost ring sight from the states.
Wonder what the dimensions are.

 

[Claven2]

Will this fit on my 870 express?
i have a 14" barrel with a front side blade.

If you have an un-tapped 870, any smith can tap your receiver to fit this hole pattern.

 

[Claven2]

Is the short for bead sights and the tall for ghost ring?

The tapped Ghost Ring receivers and bead sight receivers seem to have the same rail hole spacing. So in theory either can be used on either type of gun. The height may be a preference thing.