I currently use a lens pen, but it's starting to run out of cleaner and I've always been concerned that it might hold a piece of grit and scratch the lens. Pre-cleaning with the brush and/or a blower is a must to avoid this.
Your question raised my interest and I came across this method using Q-tips and water, which looks so easy and simple that I'm going to give it a try. The video could be much shorter were it not for the constant babbling:
Here's a dry alternative, which is a DIY version of the lens pen (commentary in Russian, but easy enough to know what's going on by watching) :
Go to the pharmacy and buy a makeup brush, or wait for the wife to, and steal it from her. At the same time buy a pack of moist eye glass cleaning towelettes. Under 10 bucks all togeather
My time working in the media, and as a bit of a camera nut, has taught me that the first thing you do before applying any physical method of cleaning is to point the lens towards the floor, (so as to leverage gravity), and use a hurricane blower, (a rubber bulb that you squeeze in your hand), to remove any larger grit or particulates. A hurricane blower is prefered to most canned air, as the canned air usually contains some sort of liquid or gaseous additives that you won't want on your precious glass. After the lens has been blown, a microfiber cloth is usually all that is needed. If absolutely needed a very light touch of lens cleaner, (or in a pinch your breath), and another wipe with the microfiber should do it.
Thanks,
Cal.
Iso propyl is my go to degreaser but is it safe to use on all these fancy lens coatings we have now?




























