AR-15 trigger adjustment screw

[dmillage]

Hey guys,

Just wondering if anyone has any experience with an AR trigger adjustment screw? And if so, where did you find it? There's several US sites that offer it but I haven't been able to find one in Canada. It looks like its just a 1/4 inch set screw (with a fine thread) so I might be able to find one at a local hardwear store.

http://www.joeboboutfitters.com/JoeBob_s_Trigger_Adjuster_p/jb-triggeradjuster.htm

Thanks!

 

[Trinimon]

Is your current trigger the adjustable type?

 

[Lexthedestroyer]

I take no responsibility on this, but I did this one, and it's taken a lot of the creep out of my trigger. I did have to tap more of the threads into the receiver...
h ttp://www.junkyardgenius.com/firearms/ar-15/ar08.html

 

[mustang979]

My Daniels defense LPK came with a small screw to do just this (I believe) I just never installed it. I was planning on putting it in tonite, I'll report back when I do with results.

 

[EHG]

You'll have to grind out some of trigger at the rear if you use any of these screws so the selector will not bind.

 

[Trinimon]

Wadda ya know, learn something new everyday...

 

[thump_rrr]

You'll have to grind out some of trigger at the rear if you use any of these screws so the selector will not bind.

No you don't.
See video above.

 

[tiriaq]

I made one of these. Short 1/4-28 setscrew under the grip retaining screw. Did remove a lot of creep, without affecting the operation of the selector.
Then I got a Rock River 2 stage trigger group, and that made a huge difference.

 

[dmillage]

Did you use the original retaining screw or did you have to replace it with something else?

 

[EHG]

No you don't.
See video above.

You will if you do it this way
h ttp://www.junkyardgenius.com/firearms/ar-15/ar08.html