charge bar for Lee pro auto disk powder dispenser

[tinymike66]

Anyone know where I can buy one locally in Hamilton/Niagara/GTA.
I got my hands on some clays powder but the disks dont throw charges lower than 3.5gr

Thanks in advance.

 

[Emmer]

In my experience with the adjustable charge bar, it isn't worth it.
I have never been confident that it throws a constant charge.

 

[tinymike66]

In my experience with the adjustable charge bar, it isn't worth it.
I have never been confident that it throws a constant charge.

What do u recommend. I need something that throws less than 3 grains

 

[L Frame]

I've had good results with higher capacity loads. Bullseye and W231 light loads under 3.5 grams are not consistent. I wouldn't suggest not to use it....just check every round until you are confident with consistency.

 

[new210/22]

There was a guy, possibly on eBay selling blank disks for the auto pro, do a little math and make a custom hole. Good luck.

http://m.ebay.com/itm/CUSTOM-CAST-B...-DISK-POWDER-MEASURE-/331772133187?nav=SEARCH

 

[Adamlxlx]

I have a micro disk that does as low as 1.8gr. I could sell it but it wont be cheap as it wasnt for me. Titan reloading makes one.

 

[Auggie Doggie]

Fill one of the larger unused cavities with epoxy. After is sets, use numbered drill bits until you get the volume you want.

Auggie D.

 

[tinymike66]

Thanks