The "What Have You Reloaded Today" thread

[bluegrizz77]

400 rnds of 30 carbine. 15 gr IMR4227 Berry's FMJ and Sierra JSP.

 

[dirtybarry]

470 rounds of 9mm using mixed brass, 4.8gr HP-38, Campro 115gr TMJs and CCI 500's.

 

[triggerman42]

Today I reformed 30-06 cases into 8mm mauser brass .

 

[Hitzy]

Trying to stay diligent putting together 100 rounds of AR15 fodder every weekend. I have buckets of once fired Fed with some mixed in NATO brass. I pull the milstuff out for my bolt guns, and consider the Fed brass "disposal" lol

 

[BioPace]

I just finished off my first box of 500 projectiles. Which makes 600 total rounds loaded. Small milestone but feels like a big one.

Lee single stage.

Time for another budget shooter order.

 

[bsand]

I just finished off my first box of 500 projectiles. Which makes 600 total rounds loaded. Small milestone but feels like a big one.

Lee single stage.

Time for another budget shooter order.

I'm on box 5 of 500, also single staging. Started last September.

Inspected 100 lapua brass, starting to see case head separation. They will be exchanged for scrap $$, place by work pays 1.70/lb.

I have annealed the same 100 twice, reloaded about 12-15 times. Not bad value at all, 7 cents per load.

 

[bluegrizz77]

Made 25 351wsl brass out of 357 max brass.

 

[Budweiser2]

250 rounds of 9mm . Using bullseye and 147 gr projectiles

 

[BillD]

Initial .38spl +P loads with powders shown, behind 158 grain Campro TMJ's - fastest to slowest. 25 of each for this first looksee...

 

[bushpig]

100 rounds of 44/40

 

[Hunter1970]

Just finished up 1k 45 ACP with 230gr Campros - man I really need to upgrade to a progressive...

 

[cigarbufff]

200 rnds of 9mm in 22 min on my loadmaster

 

[dirtybarry]

200 rnds of 9mm in 22 min on my loadmaster

you. bastard. j/k, a progressive is becoming very tempting

 

[bluegrizz77]

I was going to reload 351wsl but I had a beer instead.

 

[Smokinyotes]

Loaded a 100 rounds of 6.5-284 tonight using 140 Berger vld's and RL22.

 

[Hoakster]

75 rounds of .40 180gr CamPro TC over 6.6gr HS-6.
My first time with lube on the cases (carbide dies). Greatly reduced the sizing bulge. Only four of the 75 wouldn't drop in my case gauge and 3 of those worked after running them through the Bulge Buster.
(Still not sure about the Lee Bulge Buster. So far, only about 50/50 on removing the 'bulge'.)

Spent the next hour setting up a new set of dies for 38 Special. Hoping to load some up tomorrow night.

 

[IvoB]

I just finished loading up 37 rounds of 223 using 22 grains of H322 and Sierra 45 grain Splitzers #1310 - COAL is 2.23 Ojive is 1.870

 

[Ltbull01]

308 & 7x57AI

 

[RojamB21]

Preparations for Marksman Challenge leads to them. 270 Win, 54.2gr IMR7828, 150 gr Ballistic Tips. 3 bullets with collapsed shoulders.

Tried to pull the bullets with 30 caliber, ( Yeah, they are 270) gave'em couple zoltes, could not pull the bullets out but
unthinkable happen, the collapsed shoulder on two of the bullets got straighten up. WOW

 

[Hunter1970]

Put together 200 10mm test loads. 180grain Campro TC and progressive loads of Blue Dot.
I'm going to run the SIG a bit this weekend