O.A.L With CAMPRO 124RN in your 9mm?

[thechineseguy]

I use titegroup for my reloads and notice that Campro load data says 4.1- 4.4grns while Hodgdon load data says 3.6- 4.1grns for a 124grn RN. Why are the Campro loads higher? Has anyone tried the Campro recommended loads?

a while back, campro's website said to use 125gr loads with their 124gr plated projectiles.
when i used to load with titegroup i was using 4.1gr (shot over 10,000 rounds of these) without any issue

 

[SoylentD]

The Campro load data says 1.06 for 147gr. Why would 1.12 be better?

If the round is longer - would it feed more reliably? (I am about to start loading 2k of these).

All depends on the gun that it's in. Mine will feed 1.12 with 147 grain reliably. Some guns have to run 1.10 in order to feed and cycle.

 

[NaviDave]

I will try to determine max length in my IGB 40-9 barrel using an uncrimped dummy round and subtract .002.

That might be in the zone.

 

[Winchester-1897]

I use titegroup for my reloads and notice that Campro load data says 4.1- 4.4grns while Hodgdon load data says 3.6- 4.1grns for a 124grn RN. Why are the Campro loads higher? Has anyone tried the Campro recommended loads?

I am going to try the Campro Data Thursday, 4.2 of Titegroup us 124gr RN

 

[kodiakattack]

Besides feeding issues, how will oal affect your accuracy ? Like I mentioned earlier I seat 124g campro at 1.128- 1.130 with no issues. But haven't tried anything shorter or longer.

 

[BillD]

1.15 works fine for all my Sigs so I've felt no need to screw with it.

 

[BillD]

I am going to try the Campro Data Thursday, 4.2 of Titegroup us 124gr RN

I've found Hodgdons to be on the conservative side in comparos with other load data sites.

 

[Gunsforfun]

I am going to try the Campro Data Thursday, 4.2 of Titegroup us 124gr RN

Post the results please, thanks

 

[Winchester-1897]

Post the results please, thanks

will do..........

 

[silverfoxdj]

1.15 works fine for all my Sigs so I've felt no need to screw with it.

Same here 1.15 is my one size fits all setting after that I will adjust for different pistols

 

[Wolf@TS]

Post the results please, thanks

124gr CamPro
4.2gr Titegroup
1.125 OAL
S&W M&P9
1046fps 10 shot average over a Shooting Chrony @ 8 feet.

 

[BillD]

124gr CamPro
4.2gr Titegroup
1.125 OAL
S&W M&P9
1046fps 10 shot average over a Shooting Chrony @ 8 feet.

I've been very happy with 4.2gn TG + the 124gn Campro's as well;

 

[Gunsforfun]

I've been very happy with 4.2gn TG + the 124gn Campro's as well;

Thanks for sharing! Looks like a good load at 4.2

 

[NB Rifles]

Thanks to all that replied, some nice worth while info here. CAMPRO's seem to be working very good for many shooters.
My two Glocks seem to cycle anything form 1.100" to 1.150" just fine. Now if I just had a set of young eyes maybe I could hit what I aim at. LOL's

 

[Kryogen]

I just load them to hdy fmj spec cant remember