Hatsan semi auto +2

F

fleabaggins

CGN Regular
Rating - 100%
59   0   0
Hi all, I have a question regarding the installation of the +2 mag extension I got from S&J for my Hatsan semi auto Escort.
First, I will say, I HAVE EPOXIED A PLUG IN THE +2 TUBE SO THE FINISHED SETUP WILL NOT HOLD MORE THAN 5 ROUNDS!
On to my question - the +2 kit came with no instructions; just the mag tube extension and a new spring. I assumed I would replace the standard spring with the new one. However, the new spring is half the length of the standard one, and is quite a bit thinner diameter metal.
I have searched youtube to no avail.
Does anyone know how this is supposed to be put together? Are both springs supposed to be used? Was I sent the wrong spring in the kit?
Any help would be appreciated!!!
 
mine was longer im sure of it.
not by much but im fairly certain it was a bit longer.
same diameter as well.

really the length does not matter, what matters is how much the spring compresses.
so it could be a stouter spring hence you woulnt not get the compression you would from a weaker spring even though its longer.

try it, see if it cycles.
 
You must log in or register to reply here.
Back
Top Bottom