M&P Recoil Springs

[Zee705]

Anyone know where I could find Wolff Springs and non captive guide rods in Canada?

I got some factory reloaded light recoil ammo and the slide won't lock open on empty. 1050 fps + 24 gr. Other than that, the ammo cycles just fine and is nice to shoot. Hotter factory ammo functions properly and the slide locks open.

I figure the factory recoil spring is just a touch heavy.

 

[hillbros_96]

You could just order them from Wolff, it just may take a while. My order finally shipped this week after some discussion with them due to some stock issues.

 

[tjhaile]

Glock recoil springs will also work in an M&P. You can also reuse the factory guide rod: hold the spring back with a pair of vise grips and remove the cap screw from the end.

 

[Ganderite]

Does the MP9 and MP40 use the same weight factory spring?

 

[Zee705]

Does the MP9 and MP40 use the same weight factory spring?

I believe they're both 16 lbs. but don't quote me on that.

 

[Zee705]

Glock recoil springs will also work in an M&P. You can also reuse the factory guide rod: hold the spring back with a pair of vise grips and remove the cap screw from the end.

Nice. Any Canadian stores carry them?

 

[tjhaile]

I just got mine from glockparts.com. Practicalperformance.ca lists a variety of Glock and M&P springs.

 

[Jems]

I ordered mine from Brownells, made by ISMI, 13 lbs spings, work pretty good. I couldn't find any in Canada. Good prices too, take screw off and replace the spring.

 

[Zee705]

I ordered mine from Brownells, made by ISMI, 13 lbs spings, work pretty good. I couldn't find any in Canada. Good prices too, take screw off and replace the spring.

I just got mine from glockparts.com. Practicalperformance.ca lists a variety of Glock and M&P springs.

Great, I'll have a look. Thanks