CC sa20 lower question

jg007 said:
Is the sa20 marking on a colt Canada lower a roll mark or other? Will a fresh cerekote get ride of it?
Click to expand...

It is laser etched. If you have some Birchwood Casey aluminum black, clean with acetone and using a q-tip, apply to the SA20 etching and it pretty much disappears. I have done this on many SA20/15.7's
The birchwood stuff is pretty hard to find for some reason. I see you are in Calgary, feel free to IM me and we can arrange something.
 
Thx!I'll take you up on that offer in a few weeks when the transfer goes.through and lower is shipped

Might also sand blast and cerekote the whole thing
 
r_taylor said:
It is laser etched. If you have some Birchwood Casey aluminum black, clean with acetone and using a q-tip, apply to the SA20 etching and it pretty much disappears. I have done this on many SA20/15.7's
The birchwood stuff is pretty hard to find for some reason. I see you are in Calgary, feel free to IM me and we can arrange something.
Click to expand...

Good to know thanks.
 
You must log in or register to reply here.
Back
Top Bottom