View attachment 67715 Just want to see what the rifle is capable of, which is way more than I am. Although with original sights it's very accurate. Seems to like most ammo, but CCI standard velocity is best. Haven't tried any other match ammo. Not been able to try it out yet.
Scoping the Schultz and Larson .22
- Thread starter lyman54
- Start date
Where did you find the S&L 22 , please post how it shoots with different ammo . I've always been to tight to buy match 22 ammo and it's hard to find - so I read - I believe my better rifles shoot more types of ammo acceptable , it bothers me if I need special ammo to perform reliable. But I'm more of a gopher shooter and only demand 1/2 M.O G.
Tradeex sells them. They're a sponsor here. I've shot all kinds of ammo with good results but so far the best is CCI. They have a match chamber so at times the cheaper ammo's case has to be knocked out. For the price you can't lose with these rifles.
I've tried Lapua. Same results as CCI. The others I haven't tried yet.
If your rifle shoots CCI just as well as Lapua, which is much more costly than SK, which in turn is more than CCI, then stick with CCI and don't even bother with any of the others. They all cost more than CCI.
No, I had it drilled and tapped. I'll use the original sights also.
My gunsmith had one in the parts drawer...I also lucked out with a second one from Tradex that came with a Gehman diopter and the adapter. The adapter is 6mm x 0.75 to 9.5mmx1.0 IIRC. Front sight inserts are standard anschutz for the pressed on front sights the M70/M77 have, easy to find.
I have a thread open in the gunsmithing section, hopefully someone will make up a batch of these diopter adapters....you could post interest in there if you like.
Last edited:
turbo_bird
CGN Ultra frequent flyer
- Location
- Kamloops, BC
Nordic marksman sells a set of clear plastic inserts for Anschutz sights that work well.
Kristian
Kristian
Looks like the adapters can be made without too much trouble, fellow nutter is going to do up a few prototypes when he has some shop time. Both the pre and post M70 style sight adapters can be made, you just need to know what you have as the pre-70 are 6x1 threads and look like this vs mine above.
For diopters, the Centra one I got was on for $30 at Brownells, keep your eyes open for deals as they are not expensive for the basic versions.
For diopters, the Centra one I got was on for $30 at Brownells, keep your eyes open for deals as they are not expensive for the basic versions.
Last edited:
