Level 2 Holster for CA SP01?

[VanMan]

I wanted to use my CZ SP01 for the Duty Pistol matches, but can't find a Level II retention holster that fits the criteria:

21.2. HOLSTER - Holster, magazine pouch, belt, etc., must be of a design currently issued to a Canadian Law Enforcement Agencies as described in Rule 2.4. for Uniform Duty. Holster must be a minimum LEVEL II retention capability. *LEVEL II retention means two devicesmust be defeated by two separate actions. When the 1st retention is defeated, the firearm still cannot be removed without defeating the next retention whether a snap, strap or the internal lock. Should the firearm be released with only one retention defeated then it is not a LEVEL II holster. A tension screw or tension device is not considered a retention device.​

Can anyone make any suggestions on an appropriate holster?

 

[APS]

I think blade tech makes one but to meet that set of criteria you will likely need a level 3. Safariland should also have something.

 

[VanMan]

I think blade tech makes one but to meet that set of criteria you will likely need a level 3. Safariland should also have something.

Thanks for the tip. I was already looking through the Safariland website, but had no luck. The Bladetech website had a level 2 and a level 3 so I'll talk to our PPC guys to confirm which will meet their requirements.