Kestrel Pocket Wind Meter

Brocolt

CGN Ultra frequent flyer
Rating - 100%
281   0   1
How important is having a Kestrel Pocket Wind Meter for shooting? when looking at buying a Kestrel what options are needed or must have & what are a waste of time / money.

I'm looking to buy one but there are lots of models out there. As for me my shooting distance is 25yds bench to 100yds bench & 25 - 300yds open field varmints.
 
From my experience shooting, especially longer ranges i use my wind meter less and less. Money and time is much better spent practicing shooting in wind and learning to read it better, it just takes time.
 
I'd disagree. I use my Kestrel all the time. For your distances (inside 300m) it might not be that crucial but if you're learning to read the wind, it certainly helps you put a number to what you are seeing and what you are feeling, with regards to wind strength. A Kestrel will enable you to learn to assign a wind value to what you are seeing in terms of flags fluttering, branches/leaves swaying, etc that you can then relate to whatever wind holds you've calculated with a ballistics app. That way you're actually repeatably learning to read the wind instead of ball-parking it. Some people even suggest bringing your wind meter along with you on a daily basis and trying to put a number to the wind that you feel and then verifying it with the Kestrel, so as to better learn what a certain wind value feels like (The Wind Book for Rifle Shooters by Linda Miller and Keith Cunningham promotes this)

Also, I use density altitude for both my ballistic app (Ballistic AE) and my range cards. As distance increases, having accurate environmental is crucial for making (hopefully 1st round) hits. For instance, today I was shooting at my spot at 830 yards with a DA of 600m and a temp of 10C. My elevation was 8.6 mils. The last time I was there, the DA was 1240m and the temp 27C for an elevation reading of 8.2 mils. That's approximately a 12" difference in elevation. Had I used the same dope that I did last time, I would've entirely missed the 2/3 IPSC (12"x19") that I was shooting at! So like anything, it depends what you're trying to do but I do think it's an invaluable tool, just make sure you get one that does density altitude, the ones with built in ballistics like the Applied Ballistics ones are nice (and I want one) but you can get by with a Kestrel 4000 and a ballistics app on your phone. My 0.02
 
Density Altitude is nice, but I suggest not using it for awhile. Understand your parameters and how it affects shots prior to going the quick route with it all calculated for you.

I had a 3500, and it was good. Had everything except humidity, which plays very little into the shot.

I now have a 4500 (no balistics). Works just as well. Still don't use DA as I like to review the numbers.

As mentioned, it's a tool. It won't make you hit every shot. Use it to learn. As mentioned: seeing, feeling, and realizing is it's best attributes. Also, never just consider the wind at the shooter. No matter what people say "wind affects your shot most at shooter". If you use shooter placement wind calls all the time you will have very little success. Very much so for us who shoot in the foothills and valleys.
 
I'm in the prairies - very little rolling hills so open winds

it's still basically the same. I shoot most of my matches in desert country in America. Phoenix, Wyoming, high plains in Colorado. Not a lot of ground features, but if you only used the wind at the firing line it'd hurt you badly.

I use my Kestrel just like the previous poster, to practice my wind estimation and to "calibrate" wind flags.

Chris.
 
it's still basically the same. I shoot most of my matches in desert country in America. Phoenix, Wyoming, high plains in Colorado. Not a lot of ground features, but if you only used the wind at the firing line it'd hurt you badly.

I use my Kestrel just like the previous poster, to practice my wind estimation and to "calibrate" wind flags.

Chris.

I here you both & that was what I was thinking of using it for, I just don't want to buy the wrong model and be stuck with it & I don't want to have to upgrade later. So taking this info will a 3500 be fine or go better?
 
For the price difference I'd bump it up to the better models. Nice feature is custom screens with three data fields each. User customizable. It'll also give you DA for those quick data inputs.

Somewhere just had the good units on sale not too long ago for cheap. The models have just been refreshed so the ones we're talking about are older (still very good) models.
 
Back
Top Bottom