looking for a full Dillon setup???

O

Outdoors905

Regular
EE Expired
Rating - 0%
0   0   0
Location
Southern Ontario
I've googled the bejeezers out of it but not much luck..
the one place I found has a few bits and pieces but I'd prefer to get everything at once

looking for a Canadian retailer that has EVERYTHING in stock for the XL650, including the press of course :)

thanx!!
 
I think you'll have to be more specific regarding what you mean by "EVERYTHING". Do you mean dies? If so what calibres, shell plates, bullet feeder(s), strongmount, vibra-prime, etc. Too many options to be so vague.
 
Pr589 said:
I think you'll have to be more specific regarding what you mean by "EVERYTHING". Do you mean dies? If so what calibres, shell plates, bullet feeder(s), strongmount, vibra-prime, etc. Too many options to be so vague.
Click to expand...

sorry, ya am looking at feeders (case at least), stronghold, lighting, primer level alarm, powder alarm...the newer primer setup would be nice too. a good assortment of dies (carbide) and case gauges, full conversion kits incl toolhead swap-overs...the overhead light that goes in the toolhead. I'm a one stop 'n shop kind of buyer lol



thanx madcow, i'll do a search :)
 
Rouge River in Aurora is a Dillon dealer and you can order everything through there. I know Tenda is another in Richmond Hill who can order whatever you want. You can also order direct from Dillon via their website.
 
Try X-Reload as well. I think when you sort out exactly what you want you'll have to do special order.
 
thanx for the help everyone...
looks like between two companies I can pull everything together :)

X-reload had the best $ on the 650 (and had it in stock)

everything else I'm prob gonna give tenda a good looksee, at least their page isn't blocked here at work like everyone else is lol

again, much thanx!!
 
Outdoors905 said:
thanx for the help everyone...
looks like between two companies I can pull everything together :)

X-reload had the best $ on the 650 (and had it in stock)

everything else I'm prob gonna give tenda a good looksee, at least their page isn't blocked here at work like everyone else is lol

again, much thanx!!
Click to expand...


Good choice and then there are the accessories :)
 
I've been messaging the fine people at Ellwood Epps about getting setup with a 550 and they've been extremely helpful. The pricing is also a bit better than what I've seen on the X-Reload site. Not including sale prices of course.
 
If your close to the Lewiston border. You can order everything from Dillon Precision in the USA, they will free ship to USaddress.com. US address charges 5bucks per box received.Setting up account is free and they are located just one street into the US from Lewiston bridge. When I ordered all my stuff the Canadian dollar was in a better state. And when you cross the border you tell customs officer your declaring reloading gear... and since its made in the US and not ITAR controlled, you just pay the GST when crossing back into Canada. Depends how much your ordering to justify this route... When I did it I ordered eveything. Dillon 650, dies, casing feeder with bullet and rifle trays. Just see which avenue will save you the most and is of less hassle for you. Buy once...cry once...
 
Last edited:
RocKeTRicH said:
If your close to the Lewiston border. You can order everything from Dillon Precision in the USA, they will free ship to USaddress.com. US address charges 5bucks per box received.Setting up account is free and they are located just one street into the US from Lewiston bridge. When I ordered all my stuff the Canadian dollar was in a better state. And when you cross the border you tell customs officer your declaring reloading gear... and since its made in the US and not ITAR controlled, you just pay the GST when crossing back into Canada. Depends how much your ordering to justify this route... When I did it I ordered eveything. Dillon 650, dies, casing feeder with bullet and rifle trays. Just see which avenue will save you the most and is of less hassle for you. Buy once...cry once...
Click to expand...

I was thinking about going that route originally, but even Dillon's inventory is lacking. In a lot of cases I'm finding more stock out-sourced lol
Agreed tho, when the dollar is close to par it's the only way to go ;) I've probably streamed $20k thru USaddress when I was building my bike and jeep...my visits were almost weekly

so far I'm buying at 4 different stores trying to complete my list...and still on the search

thanx Colindobrien, i'll see if they can close things up :)
 
I ordered a complete 650 setup along with several conversion kits, dies and press upgrades from Murray Gardner about 1 1/2 years. Everything was in stock and shipped quickly. I've ordered from him several times since and always received great service. Just do a google search in his name or google Dillon dealers in Canada.
 
Chuck McCann said:
I ordered a complete 650 setup along with several conversion kits, dies and press upgrades from Murray Gardner about 1 1/2 years. Everything was in stock and shipped quickly. I've ordered from him several times since and always received great service. Just do a google search in his name or google Dillon dealers in Canada.
Click to expand...

Shooter ----/ said:
Almost all my Dillon stuff came from MDGardner.
Click to expand...

madcow said:
P&d had some a while back

google, "murray gardner"
Click to expand...

fired him off an email yesterday AM with "my list", waiting on a reply/quote :)
 
I got all my setup from Green Diamond Outfitters in Moncton NB. They don't have a web site for shopping so you'd have to give them a call. Their prices are very good and they stock everything except for the 1050.
 
I bought my 1050 from Rouge River, my 650 from Epps and many other items from Select Shooting Supplies, Firearms Outlet Canada & St Williams Arms as well as Epps for parts. If I was looking for the largest in stock selection Epps is the way to go. For ordering in stuff I use Select because I work not too far from him and it's all about convenience not to mention he has a lot of cool stuff there too.
 
i think I've pretty much got everything I need ordered now...it ain't cheap, but it sure will be pretty lol
3 suppliers, a couple of weeks back-orders for the smaller stuff...should be ready to "bench press" beginning of January :)
then I start looking at the disposables

thanx everyone for your input !!

I plan to make a trip out to SSS soon... ;)
 
You must log in or register to reply here.
Back
Top Bottom