Home made case lube

I use spray on lithium grease. Spray it onto a shop towel and rub the cases with it till the case feels slightly slippery. Never had a stuck case. I leave the lube on for firing. It's controversial. My case life went up 7 times what it was.

As for lanolin, go to an auto parts store, and ask for Fluid Film. It's lanolin.
 
This is such an awesome combination - I won't be ordering rather expensive carbide dies for anymore calibres.

Mixed up ~1:12. After you spray - let the alcohol evaporate before sizing. I dented a couple of pieces of brass by not being careful.
 
NaviDave said:
This is such an awesome combination - I won't be ordering rather expensive carbide dies for anymore calibres.

Mixed up ~1:12. After you spray - let the alcohol evaporate before sizing. I dented a couple of pieces of brass by not being careful.
Click to expand...

I`d go carbide in any event..
 
I have carbide sizing dies for 9, 40 and 45. .44 spl/mag won't be particularly high volume.

I am going to spend the money on sending my M305 to M14 Medic.
 
You must log in or register to reply here.
Back
Top Bottom