Received my new Gen 2 in the mail last week. I have not taken it out to shoot yet. However, during dry-firing, I noticed that if I #### the hammer (by pulling the bolt handle all the way back) and then gently ease the bolt forward and pull the tigger, the gun will not fire. It will only fire if I let the bolt slam forward hard. I am wondering if any Gen 2 owners have similar issues.
Kel Tec Sub 2000 Gen 2 Trigger Problem
- Thread starter whatfor
- Start date
Mine function properly too if I slam the bolt, but would not fire if the bolt is eased forward slowly. Would you, or any other Sub 2000 Gen 2 owners, mind trying to ease the bolt forward slowly and see if yours would fire please?
Mine had a similar issue not firing consistently, I was super disappointed. With a ton of reading i couldn't find anything to help with this. After a bunch of searching i found a company called Mcarbo out of the USA, they made a trigger kit to lighten and crips the trigger pull. when it came in a tore the gun apart and found that the sear spring was not set properly. I put the new springs in and put it all back together. It functions really nice now, I don't know if that was the problem (although i assume it was) as i didn't try to reset it and put it together with the original.
Bubba Yugga
CGN frequent flyer
- Location
- Midwestern Ontario
I just cycled mine real slow about a dozen times, and it functioned perfectly.
More trigger problem uncovered. After cocking the hammer and even slaming the bolt back into battery hard, the gun will not fire if I put the safety on and then off before pulling the trigger. It takes a second pull on the trigger to fire. It appears the first trigger pull resets the trigger. The gun is going back for warranty repair.
ChromeArty
CGN frequent flyer
- Location
- Sunshine Coast (PR)
Aw! That sucks man!!
I was gonna say that semi autos like it rough, after reading your first post... but the safety thing is strange.
Sorry to hear this!
