Dillon xl650 ?

[Shooterz]

Can somebody please tell me the complete depth and height of a 650xl with the case feeder attached.
I'm thinking of building my bench 34" high x 24" deep x 7' long .
The framed underside will be 22" deep with a 2" overhang (lip) on the front for bolting the 650 to.
I will not be using the strong mount at this time.

Do these dimensions all sound pretty standard ? It is to a point room dependent for me.

Thanks in advance

 

[Scar270]

35" tall from bench, you need room to toss in brass yet, approximately 13" from front of bench to back of case feeder.

My bench is 34" tall and 2' deep. Mine is on a strong mount and an additional 4.5" lift to make it good for a standing height. Press will be 3" deeper if using a strong mount.

 

[Shooterz]

35" tall from bench, you need room to toss in brass yet, approximately 13" from front of bench to back of case feeder.

My bench is 34" tall and 2' deep. Mine is on a strong mount and an additional 4.5" lift to make it good for a standing height. Press will be 3" deeper if using a strong mount.

Perfect thanks for answering.

 

[boombag13]

if you're ordering right from Dillon request a different courier than fed ex, my 650 has been driving around the SAME city for the last 36 hrs