Squire Bingham P14 ejection problem
- Thread starter Birddog4
- Start date
Welcome to CGN. Most folks start with a greeting...
What have you done so far? I'm guessing your issue is more extraction than ejection. Sometimes these problems are mitigated with a thorough cleaning. Your rifle should have 2 extractors on the bolt. Inspect them closely to make sure there is no crud built up under them, and that they are under tension.
Usually extraction issues present first with unfired rounds, as firing them seats them nicely against the bolt. You may wish to inspect your chamber (sometimes even looking closely at spent brass will show) to see if there's any issues in it a fired case might stick to.
If it is "ejection" troubles, make certain you're cycling the bolt sharply/with authority.
What have you done so far? I'm guessing your issue is more extraction than ejection. Sometimes these problems are mitigated with a thorough cleaning. Your rifle should have 2 extractors on the bolt. Inspect them closely to make sure there is no crud built up under them, and that they are under tension.
Usually extraction issues present first with unfired rounds, as firing them seats them nicely against the bolt. You may wish to inspect your chamber (sometimes even looking closely at spent brass will show) to see if there's any issues in it a fired case might stick to.
If it is "ejection" troubles, make certain you're cycling the bolt sharply/with authority.
gunrunner100
CGN Ultra frequent flyer
- Location
- NW Ontario
Does your rifle have a flat piece of metal coming out of ghe left wall of the receiver as an ejector?
Cam I did exactly that , cleaned the chamber , spotless , brush on drill ,
Shot it yesterday , did not eject one out of 24 shells , I can live with that .
Also I might have been babying it a little , so I toughened up lol .
Not only sentimental value but this gun shoots great groups .
GR 100 no it does not , two hooks on the bolt end ......thnx
Shot it yesterday , did not eject one out of 24 shells , I can live with that .
Also I might have been babying it a little , so I toughened up lol .
Not only sentimental value but this gun shoots great groups .
GR 100 no it does not , two hooks on the bolt end ......thnx
gunrunner100
CGN Ultra frequent flyer
- Location
- NW Ontario
Those are extractors, ejector is what I was referring to.
