which Boyds stock can fit a zastava M70 RH?
- Thread starter medvedqc
- Start date
The folks at Boyd's are great to deal with. Send them an email and ask them. Then you have the answer that is verified. I suspect a stock that fits a commercial 98 Mauser will work fine with little or now fussing. They are very similar actions. Not sure if the Yugo is the intermediate length or standard length.
saskgunowner101
CGN Ultra frequent flyer
- Location
- near Prince Albert
I'm quite sure they still have Zastava M70 specific stocks available at Boyds.
Blastattack
CGN Ultra frequent flyer
- Location
- Winnipeg MB
What? The Zastava is an m98 action.
tooling is coming from FN so yes it is a mauser 98 commercial action ....
the same but that option is not offered by Boyds ...
fade2black
CGN Regular
- Location
- Central Ontario
Any luck getting a one that for the rifle? I'm looking for one on a 6.5x55 Zastava M70
Boyds stocks will need work with any Mauser. They don't cut the bolt handle notch due to so many variations. With the Zastava the floorplate release is on the side, so a little work will be required there as well. Barrel channel will likely need to be tweeked a bit, and it should definitely be bedded and rear pillar installed.
fade2black
CGN Regular
- Location
- Central Ontario
found an old publishing from Boyd that says its inlet for the 798 so the zastava should be a drop in...
http://myemail.constantcontact.com/...lable.html?soid=1106306411930&aid=jeIdWHPj35A
http://myemail.constantcontact.com/...lable.html?soid=1106306411930&aid=jeIdWHPj35A
not yet. but i may start to ask Boyds with the fade2black info.
