** GTA GROUP BUY** S&J Hardware LVL 4 AR500 Steel Plates - MIN ORDER REACHED

aZn_triXta07

aZn_triXta07

Regular
Rating - 100%
80   0   0
Location
Toronto, Ontario
That's right my fellow gun nutz in the GTA! I've got the go ahead to get this group buy going.
Thanks to S&J Hardware for this wonderful opportunity to armour up without breaking the bank!

How does this benefit us!? Well...you get a solid, reliable and AFFORDABLE solution to rifle threats!
Best of all those hard earned dollars you spend go towards a CANADIAN business!

Minimum number of sets required for this to happen is 15.
All payments must be made to the group buy organizer (myself)
Payment Options: Direct Deposit & EMT
CONTACT: AZN.TRIXTA07@GMAIL.COM
Orders will be available for local pickup or shipping at buyers expense.​
Click to expand...

The options we've been given for this group buy are as follows...
Information provided can be found on S&J Hardware website.

OPTION #1:
S&J Hardware Level IV Hard Armour 10 x 12 INCH AR500 Steel Plate (Curved Shooters Cut)
PRICE: $275 + HST
WEIGHT: 5KG (11LBS) EACH
THICKNESS: ½ INCH
Multiple Hit Capability
Heat treated formed
Hardened Tempered Stress-Relieved (HTSR)
HEAVY Anti-Spall Treatment (200mils Build up of RHINO LINING)
Click to expand...

OPTION #2:
S&J Hardware Level III+ Hard Armour 11 x 14 INCH AR500 Steel Plate (Curved Shooters Cut)
PRICE: $275 + HST
WEIGHT: 5KG (11LBS) EACH
THICKNESS: ½ INCH
Multiple Hit Capability
Heat treated formed
Hardened Tempered Stress-Relieved (HTSR)
BASIC Anti-Spall Treatment
Click to expand...

In addition to the plates, for those also searching for side armour to complete their loadout we're now being offered the L4 Side Plates for $155+ HST
Limited quantity available.

Steel is heavy, but they don't expire and won't get damaged if dropped.
Just select a quality plate carrier that'll provide good support, comfort & good range of motion!

Rifle threats these plates will defeat,
7.62 NATO 150GR BALL
7.62x39
556 NATO Multi-Strike
10 YEAR Warranty

***Special Offer***
For those of you who want a lighter hard armour solution but not sacrifice the level of protection...
S&J Hardware has got you covered! Now you can carry that weight in extra AMMO!

S&J Hardware Level IV Hard Armour Level IV Hybrid Lightweight 10x12" (Curved Shooters Cut)
PRE-ORDER PRICE: $600 + HST (Minimum Order Required of TEN sets)
Production lead time of THREE weeks.
These are STAND ALONE LEVEL IV Plates
Made from a hybrid ceramic, PE, and Kevlar!
As a result they weigh only 2.650KG or 5.8LBS!
Multi-Hit Capable for 7.63, 5.56 and ss109
Single Hit 30-06API or 7.62x54 AP
Click to expand...
 
Last edited:
Current list of those interested.
*** beside your username means confirmed and money received.

LEVEL IV and LEVEL III+
1. aZn_triXta07 *** (L4 10x12 ONE SET)
2. LivesOnRope *** (L4 10x12 TWO SETS)
3. luv2roll *** (L4 10x12 TWO SETS plus L3+ 11x14 ONE SET)
4. alpha niner *** (L4 10x12 ONE SET)
5. captainafternoon *** (L4 10x12 ONE SET)
6. apage2112 *** (L4 10x12 ONE SET)
7. Daugust *** (L4 10x12 ONE SET)
8. 7.62x39 Shooter *** (L3+ 11x14 ONE SET)
9. Arugess *** (L4 10x12 ONE SET)
10. tavares86 *** (L4 10x12 ONE SET)
11. ferrous *** (L4 10x12 ONE SET)
12. Send-it *** (L3+ 11x14 ONE SET)
13. Speedbump *** (L4 10x12 ONE SET)
14. DX91 *** (L4 10x12 ONE SET)
15. bond45 *** (L4 10x12 ONE SET)
16. bombeiro346 *** (L4 10x12 TWO SETS)
17. tapamile *** (L4 10x12 ONE SET)
18. Borrowmir1776 *** (L4 10x12 ONE SET)
19. bfiles *** (L4 10x12 ONE SET)
20. SavageTRB *** (L4 10x12 ONE SET) (L4 SIDE PLATES ONE SET)
21. masterduckmaster *** (L4 SIDE PLATES ONE SET)
22. PeterMonkey (L4 10x12 TWO SETS) (L4 SIDE PLATES TWO SETS)
23. McViking *** (L4 10x12 ONE SET)

Awaiting funds from the following members,
 
Last edited:
bfiles said:
So the L3+ doesn't come in 10x12"??
Click to expand...

Just curious but is there a benefit to going with smaller sized plates if they are the same weight as the larger plates? I was considering the l3+ because they are larger and cover more body surface area but the thicker antispall on the l4 is nice to have.
 
bad time for finances, but hard to pass by. Thinking long and hard on this one - I already have LV4 ceramics but would like something for my wife in that unlikely WTSHTF event, but think she would be better off with PE due to weight.
 
Check the following link I found pretty helpful.
http://sixty-six.org/x_drive/proper_wear_of_armor.pdf

I have 8x10 plates, I'm 5'6 and my chest measurement is 40".
I have good range of motion with these plates, I can isoceles with no issue. I'm getting 10x12s for better coverage, I'll just have to adjust when shooting.

If you're taller/wider than me I would say get a larger plate!
If weights a big issue for you...I suggest getting ceramic or the hybrid plates S&J produces.


SniperInTheMaking said:
Just curious but is there a benefit to going with smaller sized plates if they are the same weight as the larger plates? I was considering the l3+ because they are larger and cover more body surface area but the thicker antispall on the l4 is nice to have.
Click to expand...
 
Plates feel heavy in the hand, but in a good carrier you will almost forget about the weight. At least for me, but i also have 20-40lbs of gear strapped to my body at work everyday. Consider this though, some people carry around 10-20lbs of extra body fat, wearing plates is kind of like that except you can shed it at a moments notice anytime you please.
 
Okay, so for a guy that's 6'3" and 220, desiring maximum coverage and protection from range NDs, and for the most avail size in plate carriers, what's recommended? Also want to grab these while it's still legal.
 
Makembite said:
Okay, so for a guy that's 6'3" and 220, desiring maximum coverage and protection from range NDs, and for the most avail size in plate carriers, what's recommended? Also want to grab these while it's still legal.
Click to expand...

Mike
Most plate carriers arw sized for 10x 12 but you do find some in 11x 14. If you are on a budged a bunch of the condor carriers like the mopc take 11x 14.
 
I've sent out a message to everyone on the list.
The group buy is now a GO as we've met the minimum number of people interested.
Currently in the process of collecting all the funds so I can send the money off to S&J Hardware!
I'll try to arrange a meetup at a local spot depending on everybodys location.

I'm going to give it til the beginning of next week for those who haven't sent funds to confirm their order to do so.
Also I've only got one person interested in side plates.
Contact me as well if you would like some with your order.
 
You must log in or register to reply here.
Back
Top Bottom