This is probably the best book to start with. Once you have a handle on everything in there, proceed to other books (and there will be quite a few, i probably have 40-50 different reloading manuals/books) It's also available as an ebook. - dan
Best reloading book ?
- Thread starter wreckingball
- Start date
This is probably the best book to start with. Once you have a handle on everything in there, proceed to other books (and there will be quite a few, i probably have 40-50 different reloading manuals/books) It's also available as an ebook. - dan
I started with Hornady's volume II and then found a used Lyman 49th edition.
This Lyman show photos of life sized ammo and it puts a good perspective on size
for future endeavors.
Few others around here including the Lee manual which I find totally cluttered.
I have just recently acquired an older Nosler Number Three and it compares to the Hornady
for ease of use and lay out.
This Lyman show photos of life sized ammo and it puts a good perspective on size
for future endeavors.
Few others around here including the Lee manual which I find totally cluttered.
I have just recently acquired an older Nosler Number Three and it compares to the Hornady
for ease of use and lay out.
Two manuals in my library get used more than others is the Sierra Infinity 6 and Nosler #7.
Both list most accurate loads and most accurate powder.
While they feature their own bullets, once you are in a weight category almost any bullet can be substituted with the exception of the longer mono bullets of similar weight.
All loads should be viewed as starting points and it is your responsibility to work up your own.
For the 60 grain Nosler loads in .22-250 the 60 grain Sierra HP was used.
For the 190 grain Sierra load in 300 WM the 190 grain Hornady was loaded to the nuts and produced 3" 3 shot groups at 300 yards.
Both list most accurate loads and most accurate powder.
While they feature their own bullets, once you are in a weight category almost any bullet can be substituted with the exception of the longer mono bullets of similar weight.
All loads should be viewed as starting points and it is your responsibility to work up your own.
For the 60 grain Nosler loads in .22-250 the 60 grain Sierra HP was used.
For the 190 grain Sierra load in 300 WM the 190 grain Hornady was loaded to the nuts and produced 3" 3 shot groups at 300 yards.
That's why having more than one manual available is useful....
FWIW Nosler has the loads with H4350 for projectiles >= 120gr
I read ABCs of reloading to start then on to the LEE second edition. If your into casting the Lyman casting book is great. I usually end up using my hornady manual the most because I tend to use these bullets but I have nosler, berger and seirra books as well. some of the older books are interesting because they sometimes have different data, hotter loads ect.
I hear what you guys are saying.
Personally all I need is the data and I really enjoy getting it from a community of reloaders that have tested and verified the loads themselves. I find this type of data to be much more accurate and detailed. I load for handgun so the Brian Enos forum is my best friend
.The manuals do provide some good information for new reloaders but the best way to learn reloading is from an experienced reloader. I'd suggest the OP finds a local reloading buddy.
Last edited:
Yes I seen that, I own all the manuals in print at the moment. Just odd that some leave out H4350 for a Creedmoor, I bet 90% of creedmoor shooters if not more use H4350
Leatherstocking
CGN Regular
- Location
- BC Rockies
I have the ABCs by Rodney James. Too much info on obsolete military calbres, corrosive primers, etc. for me. I only reload for modern calibers, so others might be interested in this sort of info.
Doesn't cover customizing brass for your chamber, IIRC.
Doesn't cover customizing brass for your chamber, IIRC.
I have the ABC book. Lot of good info there and well worth reading. .
GunsNotPuns
CGN frequent flyer
I have and refer to them all but if I had to use only one it would probably be the 2nd edition Lee.
From all my loading books my two favorites are: Hornady Vol 2 and Speer Volume 11. . . I use my Nosler Book for cross reference and case capacity. . For my old timey cartridges, that don't show up in the newer books, I have an old Ideal by Lyman Gunsite. .
Google "reloading manual error" and see what comes up. I don't think there is one perfect manual. I tend to lean toward the bullet manufacturer's manual while cross referencing to the powder manufacturer's reloading data to establish safe starting points.
