Scope rings for CZ 452 Varmint?

T

TrxR

CGN Ultra frequent flyer
Rating - 100%
20   0   0
Location
Sussex, NB
Can anyone recommend a good set of 1" scope rings for a CZ 452 Varmint? I got a set of Burring Signature Mediums but they are too low, The scope is touching the barrel. They are 0.90" high.


Thanks
 
My suggestion would be to put a D.I.P. Rail on and use Burris Signature Zee rings. Although I do not have this setup on my 452 Varmint, I have it on both mine and the Mrs' 455 Varmints.
 
Who sells D.I.P rails in Canada?

Than would also allow me to run a set of Signature Zee Rings I swapped you for offset rings on my Benchrest 40X.
 
For what scope and Objective size?
I have switched to Burris signature with inserts, high, on 4 CZ guns. 40 and 44 mm objective
Had the CZ rings but some did not sit level.
 
I bought some high no-name 11mm dovetail rings off ebay and they have held a cheap scope with a 4-16x50 zeroed pretty well without anything touching on a 455...
 
Last edited:
I have the Sun Optics 1" medium rings on my 452 varmint holding up a vortex 4-12x40. no bolt clearance issues. you can pick them up from cabelas for $20.
 
SUPER TENERE said:
UTG Pellet Gun Rings are inexpensive and super strong.
Click to expand...

These rings are probably the best bang for the buck. Less than $20 at Amazon h t tp s://www.amazon.ca/UTG-AccuShot-Premium-Mid-Profile-Airgun/dp/B001WJ4TKK/ref=sr_1_6?ie=UTF8&qid=1493891969&sr=8-6&keywords=accushot+scope+rings These scope rings are solid. I have used them and have them on a 452; the recoil pin used with spring piston air rifles is removable.
 
IMO, the best place to order DIP products is : https://kinneysshootingsupply.com/

There is also J&P dovetail to Weaver delrin adapters : https://www.jnpgunsprings.com/#!/CZ-RIMFIRE-PARTS/c/20995123/offset=0&sort=normal
You need to use them with Burris rings.

Personally, I use J&P adapters with High Burris Signature Zee Rings on my 452 Varmint.
I have good clearance with AO 40mm to 42mm ( maybe enough clearance for 44mm ) objective scope.
I also added a couple MOA cant with the offset inserts.

I used the DIP rail on other rifles and its also a very nice product. You can order one for 11mm or 3/8 dovetail, RH or LH, with 0 or 25 MOA and extended or not.
 
ben777lemay said:
IMO, the best place to order DIP products is : https://kinneysshootingsupply.com/

There is also J&P dovetail to Weaver delrin adapters : https://www.jnpgunsprings.com/#!/CZ-RIMFIRE-PARTS/c/20995123/offset=0&sort=normal
You need to use them with Burris rings.

Personally, I use J&P adapters with High Burris Signature Zee Rings on my 452 Varmint.
I have good clearance with AO 40mm to 42mm ( maybe enough clearance for 44mm ) objective scope.
I also added a couple MOA cant with the offset inserts.

I used the DIP rail on other rifles and its also a very nice product. You can order one for 11mm or 3/8 dovetail, RH or LH, with 0 or 25 MOA and extended or not.
Click to expand...

Yup, Kinneys Shooting Supply

Fast shipping and great customer service.
 
You must log in or register to reply here.
Back
Top Bottom