Delivered today. My first impressions:
This is a 5” 9mm target pistol. By “target” I mean IPSIC, IDPA, etc., not bullseye.
I rate pistols by 3 factors: How good is the trigger? How good are the sights? Can I hit with it under competition conditions?
I have several pistols with excellent sights and trigger that don’t seem to hit when I am under pressure. But my FNS has mediocre trigger and sights, but I get good hits with it in competition.
Out of the box, this pistol has the best sights and trigger of any pistol I own (excluding revolvers.) The trigger has a full length safety lever. Hardly noticeable. It has a crisp 3.8 pound release with a 1911-like very short reset.
The sights are by Warren. Steel rear with a very large U and a narrow fibre optic front. Both sit in standard size dovetails. Sight picture is fast and good.
The grip feel (to me) is better than Glock; not as good as M&P. Something like a FNS.
The controls are superb. The mag release is comfortably under my thumb. I don’t have to break my grip to drop the mag. It is extended, but has a little screw in the middle, allowing the extender to be removed. I think there is another choice of extender length in the little parts bag. I like it just the way it is. It is not an ambi release, but it is reversible.
The slide release is also extended a bit. Not an ambi. The slide does not release when a loaded mag is slammed home.
It comes with two backstraps. The small one is installed and fits my largish hands just fine. I guess King Kong would prefer the larger one.
It has very small print messages on it, unlike a Ruger. “Fires without magazine” “Warning Read Safety manual” “Made in Turkey”
It comes with 2 20-round mags, pinned at 10 to save the children. I am told that the mag body is the same as the Berretta. I tried one and it is a perfect fit, but the mag notch is in the wrong place. It looks like it would be easy to Dremel a notch in the Berretta mag, so it would work.
The attraction of the Berretta mags is the US Army surplus ones can be bought on Ebay for $10 each. I bought some and cut notches in them to fit my Diamondback 9mm. I could do the same for this TP9, if I needed more mags.
I shot a group with it tonight. Tight group but 6 inches left. Elevation was good. I tried to drift the rear sight, but it did not want to move. I took the rear sight set screw all the way out, and noticed some gunk on the threads. It looks like the rear sight has been Locktited. I gave it a shot of propane flame, then leaned hard on my sight pusher and heard a loud crack as something released. Next time I shoot, the group should be closer to the middle. If I need more adjustment, I can always push the front sight a bit, too.
The rear sight is mounted on a cover plate that can be removed. The pistol comes with a set of mounting plates for various optics.
It comes with a holster. I did not find any other pistol that would fit the CANIK holster, and I did not find any other holster that would take the CANIK pistol. Good thing they supply one.
The holster is a plastic affair with good click retention. It is mounted on a paddle that also has belt slots in it. It is adjustable for rake. It looks perfectly serviceable for my purposes (IDPA and CQB).
The pistol seems very dry out of the box. I removed the slide and lubed. It takes down like a Glock, except the tabs are much easier to grab.
I shot mild lead bullet loads in my first test. The brass all ejected just fine and fell beside me. It was not ejected very far. In watching YouTubes of this pistol, I noted that ejection was not very strong. I thought my mild ammo might not cycle, but it did just fine. (135 gr bullet over 3.5gr Titegroup) I suspect that the mild ejection is just an allusion. It seems to be set up so as to not send the brass very far. Suits me.
Thanks to PhotoBucket ‘s dumb money grab, I have no picture to show you, but it looks just like the other pictures you see of it.
I paid $700 to the door for this, and am very pleased.
This is a 5” 9mm target pistol. By “target” I mean IPSIC, IDPA, etc., not bullseye.
I rate pistols by 3 factors: How good is the trigger? How good are the sights? Can I hit with it under competition conditions?
I have several pistols with excellent sights and trigger that don’t seem to hit when I am under pressure. But my FNS has mediocre trigger and sights, but I get good hits with it in competition.
Out of the box, this pistol has the best sights and trigger of any pistol I own (excluding revolvers.) The trigger has a full length safety lever. Hardly noticeable. It has a crisp 3.8 pound release with a 1911-like very short reset.
The sights are by Warren. Steel rear with a very large U and a narrow fibre optic front. Both sit in standard size dovetails. Sight picture is fast and good.
The grip feel (to me) is better than Glock; not as good as M&P. Something like a FNS.
The controls are superb. The mag release is comfortably under my thumb. I don’t have to break my grip to drop the mag. It is extended, but has a little screw in the middle, allowing the extender to be removed. I think there is another choice of extender length in the little parts bag. I like it just the way it is. It is not an ambi release, but it is reversible.
The slide release is also extended a bit. Not an ambi. The slide does not release when a loaded mag is slammed home.
It comes with two backstraps. The small one is installed and fits my largish hands just fine. I guess King Kong would prefer the larger one.
It has very small print messages on it, unlike a Ruger. “Fires without magazine” “Warning Read Safety manual” “Made in Turkey”
It comes with 2 20-round mags, pinned at 10 to save the children. I am told that the mag body is the same as the Berretta. I tried one and it is a perfect fit, but the mag notch is in the wrong place. It looks like it would be easy to Dremel a notch in the Berretta mag, so it would work.
The attraction of the Berretta mags is the US Army surplus ones can be bought on Ebay for $10 each. I bought some and cut notches in them to fit my Diamondback 9mm. I could do the same for this TP9, if I needed more mags.
I shot a group with it tonight. Tight group but 6 inches left. Elevation was good. I tried to drift the rear sight, but it did not want to move. I took the rear sight set screw all the way out, and noticed some gunk on the threads. It looks like the rear sight has been Locktited. I gave it a shot of propane flame, then leaned hard on my sight pusher and heard a loud crack as something released. Next time I shoot, the group should be closer to the middle. If I need more adjustment, I can always push the front sight a bit, too.
The rear sight is mounted on a cover plate that can be removed. The pistol comes with a set of mounting plates for various optics.
It comes with a holster. I did not find any other pistol that would fit the CANIK holster, and I did not find any other holster that would take the CANIK pistol. Good thing they supply one.
The holster is a plastic affair with good click retention. It is mounted on a paddle that also has belt slots in it. It is adjustable for rake. It looks perfectly serviceable for my purposes (IDPA and CQB).
The pistol seems very dry out of the box. I removed the slide and lubed. It takes down like a Glock, except the tabs are much easier to grab.
I shot mild lead bullet loads in my first test. The brass all ejected just fine and fell beside me. It was not ejected very far. In watching YouTubes of this pistol, I noted that ejection was not very strong. I thought my mild ammo might not cycle, but it did just fine. (135 gr bullet over 3.5gr Titegroup) I suspect that the mild ejection is just an allusion. It seems to be set up so as to not send the brass very far. Suits me.
Thanks to PhotoBucket ‘s dumb money grab, I have no picture to show you, but it looks just like the other pictures you see of it.
I paid $700 to the door for this, and am very pleased.
Last edited:
