Supermatic trophy. 22 value, info?

[marshall]

The flat spring is the sear bar spring under the plate on the left side, easy to do , just take the screw out, it disconnects from the sear if the slide is not all the way ahead.
The strange spring will be the sear spring adjuster, leave alone if it works, people start screwing in the adjuster and can mess things up.
the real small coil spring is the one that is in the slide lock lever,
there is not really a trigger spring on the trigger in these guns

 

[dan belisle]

Have a Supermatic Citation. Shoots very well, best of my Colt Woodsman Match Target, or the S&W 41 and Browning Medalist I had. Very nice pistols. - dan

 

[Glenzo]

I'm tempted to send it out for a complete cleaning and tuning but cant find anyone willing to do it.

 

[wce323078]

The one thing you have to watch out for is dry firing. to much will leave a mark and push a bit of metal into the chamber area and lead to extraction problems. I have never seen this problem on other .22 pistols but then again they were not club guns. but I would think to much dry firing would do much the same to most rimfires

 

[Halger280HVMag]

The HS firing pin strikes the breech face.
Unlike the Ruger pistols.
Dry firing a HS pistol without a round or a dummy in the chamber.
WILL damage the gun.

The one thing you have to watch out for is dry firing. to much will leave a mark and push a bit of metal into the chamber area and lead to extraction problems. I have never seen this problem on other .22 pistols but then again they were not club guns. but I would think to much dry firing would do much the same to most rimfires

 

[Got Juice?]

I'm tempted to send it out for a complete cleaning and tuning but cant find anyone willing to do it.

If I wasn't so darn busy, I would even volunteer my time. I love working on the vintage guns.