Glock 34 MOS interchangeable slide?

[kb007]

My search came up empty Anyone know if the slide is interchangeable between the MOS and non MOS models of the same Glock? eg G34 MOS and G34 fit each other's frames?

 

[Kratos]

17/22/34/35 are all interchangeable as long as it's the same Gen for slide and frame.

 

[lavino]

That's right. My G17 Mos can swap with my non-Mos G17 no problem at all.

 

[kb007]

Thanks!

Having said that, where can I buy a G34MOS slide in country?

 

[silver bullet]

Also interested.

 

[Claven2]

17/22/34/35 are all interchangeable as long as it's the same Gen for slide and frame.

Aren't Gen 2 and 3 slides also interchangeable, provided the Gen2 has a 15 degree cut ejection port slide?

Gen 4 is not, takes a different recoil spring assembly and a few other minor changes - I think.

 

[IM_Lugger]

I don't think anyone sells just slides esp mos. I would look on EE .

 

[i_hanson]

I don't own a Glock myself, but I believe that Glock stamps both the slide and the receiver with a serial number. If you changed the slide, you would have a different serialized number item to an existing frame.
Please correct me if I am mistaken.

 

[skoal]

I don't own a Glock myself, but I believe that Glock stamps both the slide and the receiver with a serial number. If you changed the slide, you would have a different serialized number item to an existing frame.
Please correct me if I am mistaken.

Slide and frame won't match but that dosnt mean a think it's still registered to whatever the frame is.

 

[rkm456]

I don't own a Glock myself, but I believe that Glock stamps both the slide and the receiver with a serial number. If you changed the slide, you would have a different serialized number item to an existing frame.
Please correct me if I am mistaken.

I'm too lazy to go and look at mine, but I believe they serialize the barrel and frame rather than the slide.

 

[Kratos]

Aren't Gen 2 and 3 slides also interchangeable, provided the Gen2 has a 15 degree cut ejection port slide?

Gen 4 is not, takes a different recoil spring assembly and a few other minor changes - I think.

Sorry, I don't know on Gen 2, I've only worked on Gen 3 and 4's, you might be correct. Gen 3 and 4 do not mix on the 17/22/34/35 or 19/23/32, 26/27 are interchangeable because the Gen 3's had the newer recoil spring that all the Gen 4's received.

Serial numbers only matter on frames, unless you're OCD. But, do not remove any serial numbers, that's a crime.