what's your favorite .308 bullet & load?

kawicrash said:
168 Sierra or Hornady HPBT match, Remington case, 44gr IMR 4064 Fed 210.
Remington 700 Varmint Synthetic, Leupold VX ii 4-12 AO.
Lee collet neck sized.
10 shots @ 100yds. squares are 1/2"
Iau9DkEO5tyj3H9Zho23eF15gcEcsOxm3hCd-G5q-SUBPO9PEj2BOVTC4-Jf5aLzFMLN2mOcALc8dtCcXgUBy8EI_N0_845J3vuyDz9AcnKwsk99au1b-Fc2oHN13pPHtkOWQY0kWw
Click to expand...

Outstanding. well done. Bit more to it than a good rifle & ammo.
edi
 
EJG said:
thanks,
Stainless CTR 20" 308, Hausken JD224 Suppressor (opened bore diameter by 0.3mm to get rid of flyers), PSE-Composites E-Tac4 carbon stock, Spuhr ~20Moa 34mm one piece mount. Kahles K624i scope.
edi
Click to expand...

Nice rifle Edi , you should post some pics of your rifles with your own stocks , and those are some impressive groups by the way .

Aka AB
 
anglia2 said:
Nice rifle Edi , you should post some pics of your rifles with your own stocks , and those are some impressive groups by the way .

Aka AB
Click to expand...
Hi AB,
nice to meet here. that is one of our stocks in the pic. I know it sounds like the bow company by coincidence ... PSE = Peter, Stephan, Edi. My sons and myself. ;)

edi
 
Of course , my apologies , I forgot about that . You build some very nice stocks my friend , I will get one off you . I just have to decide what I'm going to build this time around . I've been feeling the need for another 308 hmmm .
 
Gatehouse said:
When my Ruger Scout shows up I'll use 130gr ttsx to hunt with.
Click to expand...

Hope you have better luck than I did with my M77 MKII Stainless .308 with 22" barrel... tried all my "goto" .308 loads with the 130 TTSX and then started bracketing when all I could get was 2 MOA consistently... after 200 rounds I bailed and went back to 150 NBT's and 150 IB's and went straight back to under MOA out to 300 yards... maybe just my rifle that didn't like them? At some point I will try the TTSX 150's and see if that makes some difference.
 
try removing the jacket fouling in the bore before shooting copper bullets, accuracy usually is much more consistent.
 
Have a custom build in .308 in transit from Lloydminster.
I asked for a rifle that will be shot primarily with Federal Gold Medal Match 168 grain.
Before shipping approval, they sent me two 5 shot 100 yard targets. Both with the same results.
Due Monday, it will be a long weekend ;).
Resized_20160608_155312.jpg
My Insite .308 cropped.jpg
 

Attachments

  • Resized_20160608_155312.jpg
    Resized_20160608_155312.jpg
    40.3 KB · Views: 86
  • My Insite .308 cropped.jpg
    My Insite .308 cropped.jpg
    30.3 KB · Views: 86
njlondon said:
Have a custom build in .308 in transit from Lloydminster.
I asked for a rifle that will be shot primarily with Federal Gold Medal Match 168 grain.
Before shipping approval, they sent me two 5 shot 100 yard targets. Both with the same results.
Due Monday, it will be a long weekend ;).
View attachment 134216
View attachment 134217
Click to expand...

You lucky bastard!! I have an AI barrel coming from Harley in Jan (also .308). Seeing how yours shoots makes me feel like dancing!!:dancingbanana:
 
And with no scope .... now that's doubly impressive !! :p:p




Nice lookin' rifle njlondon.


njlondon said:
Have a custom build in .308 in transit from Lloydminster.
I asked for a rifle that will be shot primarily with Federal Gold Medal Match 168 grain.
Before shipping approval, they sent me two 5 shot 100 yard targets. Both with the same results.
Due Monday, it will be a long weekend ;).
View attachment 134216
View attachment 134217
Click to expand...
 
You must log in or register to reply here.
Back
Top Bottom