HB Industries CZ Scorpion Aftermarket parts are here! Triggers, Ext Charing Handles!

ctcs

ctcs

Expired Business Member
Location
Vancouver, BC
HB Industries CZ Scorpion EVO 3 Reduced Weight Trigger Spring Kit



Our spring kit provides a 5.5lb trigger pull (down from 9.0+ lbs factory trigger). Simply remove your factory trigger and disconnector springs (#63 and #50 respectively on the factory parts diagram) and replace them with our application specific trigger and disconnector springs. Both springs in our kit must be used together. Gunsmith installation is recommended, but not required.

TIP: Many customers opt to also deburr and polish the working surfaces of the trigger components while replacing these springs; doing so will typically result in an even lower trigger pull weight and smoother trigger operation.

  • Provides 5.5lb Trigger Pull
  • Fits CZ Scorpion EVO3 Pistol and Carbine
  • Includes (1) Trigger Spring, (1) Disconnector Spring, and (1) Firing Pin Safety Shim

$19.99

HB Industries CZ EVO3 Scorpion Welded Trigger Pack Drill



Do you need to remove the welded trigger pack from your 2015-2017 CZ Scorpion EVO S1 pistol/carbine? We have you covered. This kit includes the correct drill bit and a replacement screw.

$11.99

HB Industries CZ Scorpion EVO 3 DELTA Extended Charging Handle (Red or Black)



$94.99

HB Industries CZ Scorpion EVO 3 Theta Extended Charging Handle (Red or Black)



$94.99

HB Industries CZ Scorpion EVO3 THETA STOCK Trigger (Red or Black)



$54.99

HB Industries CZ Scorpion EVO3 THETA FORWARD Trigger (Red or Black)



$54.99

HB Industries CZ Scorpion EVO3 DELTA Trigger (Red or Black)



[URL="https://ctcsupplies.ca/products/cz-scorpion-evo3-delta-trigger-red-or-black"]$54.99

HB Industries CZ Scorpion EVO3 AK Style Safety Selector



$49.99

HB Industries CZ Scorpion EVO3 Mini AK Style Safety Selectors



$44.99

HB Industries CZ Scorpion EVO3 Duckbill Mag Release Lever



$79.99

HB Industries CZ Scorpion EVO3 Paddle Mag Release Lever



$79.99
 
FWIW, the Scorpions acquired from Wolverine will not need the drill bit kit.

That said, everyone should grab the spring kit. Magic.
 
Just a "watch out for" guys. After changing out the trigger springs for the HBI springs and putting some rounds thru it, check the case securing screw (p/n 48 in your Scorpion manual). Mine loosened off twice after range sessions. I tried blue Loctite after the HB Industries trigger spring install, but the screw still came loose. Might be something you want to keep an eye on.
 
doo925 said:
Just a "watch out for" guys. After changing out the trigger springs for the HBI springs and putting some rounds thru it, check the case securing screw (p/n 48 in your Scorpion manual). Mine loosened off twice after range sessions. I tried blue Loctite after the HB Industries trigger spring install, but the screw still came loose. Might be something you want to keep an eye on.
Click to expand...

This screw is clearly different in the HB kit. Reuse the OEM screw, wash the oil off it, and apply a small dab of blue loctite to it.
 
Got an email that my order has been shipped! Waiting on my charging handle and some other goodies :)
 
just got my spring kit yesterday and got it installed in 20 mins , made a huge difference , now just need to wait till you guys get in some extended charging handles and ill be set
 
You must log in or register to reply here.
Back
Top Bottom