Light 10/22 build thread

rommelrommel

rommelrommel

CGN Ultra frequent flyer
Rating - 100%
478   0   0
20_D5_FFA4-5134-41_E5-_BD4_A-545_E2_E5_F2_A30.jpg


It’s a Dlask DAR22 receiver with integral rail, Dlask bolt, Whistlepig 10” steel sleeved aluminum barrel (fluted and threaded), BX trigger with Brimstone magic done to it, along with auto bolt release and a extended mag release lever. That’s a Knoxx Axiom stock (pinned to disable the last two notches) and a Bushnell TRS-25 up top. It’s has a small extended charging handle and bolt buffer you can’t see.

OAL is 26.3” and weight loaded with a rotary mag is 3lbs 11 oz.

Obviously you could get a lighter receiver, a lighter optic, forego the charging handle, mag release, and get it down a bit more but this thing is pretty darn light.
 
Last edited:
Thank you!

I considered the 12” barrel but when I got the stock I realized that no one aside from a small child would use the shortest positions.

The barrel I had to get imported, I don’t think they’ve been brought up at the retail level for a long time. This was 9.9 oz on my scale so the weight difference to go to a 12” aluminum barrel is negligible, obviously steel is a different story.
 
rommelrommel said:
Thank you!

I considered the 12” barrel but when I got the stock I realized that no one aside from a small child would use the shortest positions.

The barrel I had to get imported, I don’t think they’ve been brought up at the retail level for a long time. This was 9.9 oz on my scale so the weight difference to go to a 12” aluminum barrel is negligible, obviously steel is a different story.
Click to expand...

Thanks for the info. This setup would be used by my kids so maintaining the smallest positions would be beneficial for them.

Out of curiosity who did the import work for you?
 
This was my 'light build'
stock receiver, TacSol aluminum barrel, BX trigger, SeeAll optic, Hogue stock, NoDac Spud open sites.

id have to go look up the weight, its been a while since the last 'light build thread' but i think it was 4lbs and change.

i like this build as im a big guy and i prefer the full size gun.

008_zpsk65ht7di.jpg
 
Nice job rommel. Curious, can you eject a magazine without removing your hand completely from the grip.
It looks like you would have to pinch the lever under the trigger guard, & pull down.
 
wayupnorth said:
This was my 'light build'
stock receiver, TacSol aluminum barrel, BX trigger, SeeAll optic, Hogue stock, NoDac Spud open sites.

id have to go look up the weight, its been a while since the last 'light build thread' but i think it was 4lbs and change.

i like this build as im a big guy and i prefer the full size gun.

008_zpsk65ht7di.jpg
Click to expand...

Look good, I think we both got a twin, lol.
 
KND said:
Both are in Magpul stock. The takedown is 16.1 inch and the other is 12 inch barrel.

Cheers!
Click to expand...

You're right. Missed that at first glance.

Does the 12" barrel have an extension or muzzle device? If so where does the barrel end without it?

I'm debating a 12" Magpul hunter stock build and I'm thinking I'll need to cut the stock back a little to work.
 
G.Mitchell said:
You're right. Missed that at first glance.

Does the 12" barrel have an extension or muzzle device? If so where does the barrel end without it?

I'm debating a 12" Magpul hunter stock build and I'm thinking I'll need to cut the stock back a little to work.
Click to expand...

Yes, the 12 inch barrel has threading, the thread start at the end of front sight about 3/4 inch in lengh and without the Dlask's muzzle brake, you will need to cut the Magpul's stock if you want to.

The stock need a small dremel job to fit the muzzle brake, kinda look good that way.

Cheers!
 
You must log in or register to reply here.
Back
Top Bottom