Maccabee Defense SLR Non-Restricted Receiver Set [WAIT LIST]

Status
Not open for further replies.
Len One O said:
Has there been any sort of list on what triggers will work in these receivers? I started buying components but I want a trigger with a 2-3 lb pull. Would love to drop in a trigger tech but that from what I understand was ruled out.
Click to expand...

so far all we know is that geissele triggers are good to go, and timney probably not. if there's another brand you come across that you like, post it here and we can try to find out if it's compatible
 
I think it has already been discussed in other threads that trigger packs will not fit.
Maybe someone can clarify but I believe it's only the mil spec style of trigger that will fit?
 
scourge18a said:
I think it has already been discussed in other threads that trigger packs will not fit.
Maybe someone can clarify but I believe it's only the mil spec style of trigger that will fit?
Click to expand...

The SLR apparently has its own pack that you need to assemble with parts from a trigger kit. only the trigger kits you buy that come with the individual parts work, not the packs.
 
Has anyone been able to verify if BCM KMR anti-rotation tabs will work with the upper? They seem to index near the optics rail unlike Geisselle or ALG rails.
 
chicu1981 said:
Any plans on selling with a upper with barrel installed?
Click to expand...

Scuttlebutt was that MAC-D is going to do complete rifles for around the $2500 mark.

The TNA stuff is pretty cool in that its easy to order everything needed to install a barrel and you can beg, borrow, or buy the reaction rod or magpul fixture (<100 bucks). Even without a torque wrench 30 ftlb-70ft lb gives you a pretty good margin for error if youre half intelligent.
 
Cabbose said:
Has anyone been able to verify if BCM KMR anti-rotation tabs will work with the upper? They seem to index near the optics rail unlike Geisselle or ALG rails.
Click to expand...

It was stated on facebook, (slr rifle owners group) just recently, that Maccabee has modified the slr to have the normal ar upper profile we see on standard milspec uppers (at the front near the threads) so now ANY indexing handguard will work without worry.
 
Duncan71 said:
Scuttlebutt was that MAC-D is going to do complete rifles for around the $2500 mark.

The TNA stuff is pretty cool in that its easy to order everything needed to install a barrel and you can beg, borrow, or buy the reaction rod or magpul fixture (<100 bucks). Even without a torque wrench 30 ftlb-70ft lb gives you a pretty good margin for error if youre half intelligent.
Click to expand...

I have built several lowers and I am pretty competent to make those. The problem with upper is the terminology such as head spacing and indexing. Plus I dont have a vice and nor do I ha e a space to install a vice in my basement. And I believe installing barrel is the most critical piece of making an AR style rifle. I would love to build this. I already have bcg, chnarge hamd and some extra LPK and trigger tech trigger.
 
chicu1981 said:
I have built several lowers and I am pretty competent to make those. The problem with upper is the terminology such as head spacing and indexing. Plus I dont have a vice and nor do I ha e a space to install a vice in my basement. And I believe installing barrel is the most critical piece of making an AR style rifle. I would love to build this. I already have bcg, chnarge hamd and some extra LPK and trigger tech trigger.
Click to expand...

Maybe we should make a builders thread, where people in the same cities can get together and share tools etc
 
Status
Not open for further replies.
Back
Top Bottom