Bullet pulling

[xJMV]

Hey everyone,

I need to remove bullets from a certain number of 9mm ammo... I have a kinetic hammer but it is time consuming...

I know Hornady make a camlock die for rifle calibers, but is there a die that exists to do it for handgun ammo whoever make it?

 

[4n2t0]

Collet bullet pulling die with the appropriate collet.

P.S. I guess you didn't take our advice from this thread (https://www.canadiangunnutz.com/forum/showthread.php/1652903-9mm-reloading-question) and now you have to pull a bunch of bullets? lol. At least you're learning, even if it's the hard way.

 

[prevost12]

RCBS makes a good unit too.

 

[xJMV]

Collet bullet pulling die with the appropriate collet.

P.S. I guess you didn't take our advice from this thread (https://www.canadiangunnutz.com/forum/showthread.php/1652903-9mm-reloading-question) and now you have to pull a bunch of bullets? lol. At least you're learning, even if it's the hard way.

Not related, otherwise would have just put the bullets back into the press to push the bullet further down...

 

[Magellann]

Good to know, that kinetic hammer can be a real pain when you have a bunch to pull.

 

[hunter5425]

I pulled a few with my rcbs collet puller and a 35 cal collet. Everything is less messy and can be reused.

 

[xJMV]

Good to know, that kinetic hammer can be a real pain when you have a bunch to pull.

Well, for few only it can be good... The fact that using the press, the case remain upward, so the powder and the bullet are not mixed into the hammer... It makes things easier and faster when you just want to change the powder load and re-seat the bullets.

 

[VICIOUS]

push bullet down and pressure goes UP!

 

[VinnyQC]

rcbs is supposed to be better than the hornady, and roughly the same price. Looking at the collets of both I think it's probably true. I have the rcbs and it works great.

 

[unic]

I used these https://grip-n-pull.com/

 

[Zee705]

I ordered one of these for $30 US shipped from the YouTube creator.

https://youtu.be/YDArWf7exVU

It should arrive today or Monday.

 

[silverfoxdj]

Hornady collet puller works well..

 

[coreyd]

I have the Hornady and they definitely make pistol caliber collets for it. I use mine primarily for 9mm, 45acp and 223.

 

[shotgun12G]

x2 on the Grip-N-Pull tool. Fastest way to pull a lot of bullets!

 

[xJMV]

I used these https://grip-n-pull.com/

Where did you find those ?

EDIT: I meant : Where did you find those in Canada ?

 

[Magellann]

I ordered one of these for $30 US shipped from the YouTube creator.

https://youtu.be/YDArWf7exVU

It should arrive today or Monday.

I like that one, it seems to work very slick. I'll get it ordered soon.

 

[play.soccer]

I used these https://grip-n-pull.com/

x2 on the Grip-N-Pull tool. Fastest way to pull a lot of bullets!

This!!

 

[LeadMonkey]

...

 

[play.soccer]

Tagged, I am also interested in ordering, are they available in Canada or do you have to pay shipping from the USA?

I bought mine right from their website. Shipping was pretty quick.

 

[LeadMonkey]

...