CanAm
Canada Ammo - CGN Sponsor
- Location
- Vancouver, BC
berdan
CHEAP 7,62x39 NON-CORROSIVE !!!
- Thread starter Duff350
- Start date
VinnyQC
CGN Ultra frequent flyer
- Location
- Quebec city
lucsergerie
Regular
- Location
- Laurentide,Qc
Look like my information was wrong ! Thank you
https://calibremag.ca/north-eastern-arms-acquired-by-black-creek-labs/
Gun123
CGN Regular
- Location
- National Capital Region
Hahaha
meatball74
Regular
- Location
- Calgary, Alberta
Just add it to your wishlist and you'll get notified as soon as it gets back in stock, which last month it came back twice.
Willz
Member
- Location
- Stony plain Alberta
Nice
Thank you for stating the obvious, now go accept your Pulitzer
saskcop
CGN Ultra frequent flyer
- Location
- Saskatchewan
What is this, newbie crabby pants day?
Just to let everyone know that I got 1 cartridge that is out of spec. I won't chamber fully into my NEA upper and caused my BCG kinda stuck kinda hard (about 90, 95% closed) with a live round inside the chamber on Sunday (it was loaded in the middle of the mag so when no bang after the click I starting investigating and found the BCG stuck). Eventually I got it out and found the bottom part of the case seems to expanded like an already fired case before running a resizing die. I shot about 40% of a case of 1000 without any previous issue so I would definitely count this one as an odd case. The rest of the 50ish rounds I bought to the range fired all 100% ok after that round.
Definitely not a rant at all so don't get me wrong
Just to share my experience with the others. Still great ammo and I will keep buying! But I will start running a gauge on all the rounds I am bringing to the range before putting it into the gun for I know the gauge would have caught that problem round.
Definitely not a rant at all so don't get me wrong
Just to share my experience with the others. Still great ammo and I will keep buying! But I will start running a gauge on all the rounds I am bringing to the range before putting it into the gun for I know the gauge would have caught that problem round.
p.Rundle
CGN frequent flyer
Just to let everyone know that I got 1 cartridge that is out of spec. I won't chamber fully into my NEA upper and caused my BCG kinda stuck kinda hard (about 90, 95% closed) with a live round inside the chamber on Sunday (it was loaded in the middle of the mag so when no bang after the click I starting investigating and found the BCG stuck). Eventually I got it out and found the bottom part of the case seems to expanded like an already fired case before running a resizing die. I shot about 40% of a case of 1000 without any previous issue so I would definitely count this one as an odd case. The rest of the 50ish rounds I bought to the range fired all 100% ok after that round.
Definitely not a rant at all so don't get me wrong
There's always a chance your barrel may be a bit funky too, I have seen NEA barrels have some major issues.
That is possible and I won't rule it out. I am in the process of building a new 10.5" 7.62x39 upper It will be a diff brand barrel and BCG but stripped upper and rail still need be NEA since I got a few of them from SFRC. Will see how it goes
Bossman0
Member
- Location
- Toronto, Ontario
its here! $350 for 1000 rounds
thanks for the heads up
I bought a case of 1000 9mm and a bunch are all messed up primers half seated or set in twisted. Already pulled about 20 rounds out of the box without even seaeching too hard.. must say kind of a let down. Anyone else have any similar issues with the 9mm bulk ammo
contact148
CGN Ultra frequent flyer
- Location
- THE DMZ
rosconow
Regular
- Location
- Okanagan, B.C.
You're the one that was asking.... maybe just go back to lurking.
meatball74
Regular
- Location
- Calgary, Alberta
I mean I realize this stuff is popular but do they only bring in 6 or 8 boxes at a time? it's usually available for maybe a day and then its gone! bring in a literal truckload!
