BCL 102 stripped receiver set thread

DILLIGAF

DILLIGAF

BANNED
BANNED
BANNED
EE Expired
Rating - 100%
262   0   0
Location
Alberta
Just want to make a thread dedicated to the guys that bought stripped receiver sets.

Ill update this thread as we go along with part #s so all the info can be on page 1. Ive gotten a few PM's asking for info so I might as well do a proper list.

Ill start tonight by gathering all the info from all the other threads and start the list. But feel free to post parts that are known to work.
 
Here is the list of parts that are confirmed to work so far

- JP BCG ( some rifles need different length gas tubes )
- Brownells BCG ( depends on what day your BCL was built )
- Criterion 18.5" .308 AR, Light Weight, 1x10, Chrome Lined Barrel.
- Midwest Industries MI Armalite AR10 One Piece Free Float Handguard #MI-AR10SSM12
- Geissele SSA trigger
- SLR Helix Handguard (Choose DMPS high Armalite nut when checking out)
- BCM/VLTOR Charge Handle ( fitting required unless you have a Gen 1 )
- Phase 5 bolt catch extended v2
- law tactical folder
- Raptor charge handle ( fitting required unless you have a Gen 1)
- Ergo grip
- Triggertech triggers
- JP Silent Capture 308 buffer
- TALON AMBIDEXTROUS SAFETY
- Fulton Armory High pressure bolt ( fits Gen 1 )
- SLR Adjustable gas block
- Fulton Armalite gas tube
 
Last edited:
Geissele SSA trigger: works (You may have to reuse the 102's original pins)
SLR Helix Handguard: Works (Choose DMPS high Armalite nut when checking out)
BCM/VLTOR Charge Handle: Works* (the 'ears' may not fit - must shave material off)

I'll put more of the stuff i have in this post
 
DILLIGAF said:
Not sure if any of this crap fits yet, Once I know for sure Ill update the tread.

27497308_10156170043638552_332219327_n.png

27173188_10156170929598552_6520923061570107054_o.jpg
Click to expand...
Fulton Armory ships eh. What is the barrel nut type on the 102? I am really crazy to use the new woven carbon fiber handguard from Brigand Arms.
 
These are the parts on my gen 2 that have worked: Phase 5 bolt catch extended v2
law tactical folder works
Geissele ssa-e
Raptor charge handle with mods
slr helix dpms high with armalite nut
Ergo grip

Tacmod stock did not work could probably get it to work by cutting a coil off the buffer spring.

Looking for an accurate 6.5cm barrel any suggestions?

For the barrel from brownells are you paying the export fee or just getting it imported thru a tech?
 
Last edited:
rambones said:
Ordered my set.

Does anyone know the exact thread size of the bcl?

I want to put a SR25 pattern Handguard, urx4 Mlok.
Click to expand...

I have the URX4 on my MV, I can’t use the sling attachment on it.
The QD sling swivel hits the barrel,and won’t fully lock into place.

I had to use a sling mount adapter.
I guess this all depends on what barrel you’re using.

Anyway,just thought I’d let you know in case this matters to u:)
 
I'll let you know on some other stuff.

Waiting on ARFX tube/stock and JP captured buffer with that.

Triggertech triggers work.
SLR DPMS high Armalite threaded handguard work.
Aluminum grips need shaping and another hole drilled for the takedown pin spring/detent.
 
You must log in or register to reply here.
Back
Top Bottom