IHC Garand - What do you guys think of this one?

Claven2

CGN Ultra frequent flyer
Rating - 100%
410   0   2
Location
Onterrible
I found this one at a local shop and was not able to do a proper teardown before having to decide to buy or not. All I could really by cycling the action was IHC receiver, bolt, oprod, sight knob and gas screw. I wasn't even able to pull the trigger assembly before buying. Given I could not check more, I think I paid a fair refurb garand price after checking the action was not loose in the stock and that the bore looks like new. No cracks or major wood defects, just lots of handling and carry evidence.

The gun has plenty of handling and carry wear, but clearly was not actually shot much as the bore is like new and there is almost no discernable wear to the receiver feed rails. The bolt, oprod and receiver show signs of having been cycled a LOT, so I suspect this rifle was used for a lot of drill somewhere (training?) where part of the drill was to present the rifle for the action drill, like in a basic training setting.

The stock has a faded red "39" painted on one side of the stock in the arabic style and the shopkeep advised the person who brought it in said they had had it for over 30 years. I'm thinking maybe ex-Saudi military aid?

Now that I've had time to do a detail strip of every part, I'm leaning toward this being an as-manufactured non-refurb IHC, but would like yours guys' opinion as that is indeed a rare thing to find.

I didn't take pics of everything, I forgot to take a pic of the bolt and the 4-digit code inside the stock barrel channel, but both are present.

March 54 LMR barrel, which is correct for a 5 millions IHC:
7HMMRsr.jpg


rDFFiEw.jpg


wtioXxR.jpg


scZYF43.jpg


mbRHJ77.jpg


yIRfX0t.jpg


dsmN4Xc.jpg


1fOZLiZ.jpg


Hard to see here, but this is a faint eagle surmounted by stars ordnance mark in a rectangular box with rounded edges. It's not been sanded, the stock just ha a lot of handling wear like it was oiled a lot in a barracks. Also has the circle-P proof on the front of the grip.
riMifm8.jpg


Z7XETAC.jpg


z2psafV.jpg


w63oO8O.jpg


kzuFg62.jpg


5x9vEZC.jpg


Happy to post pics of other areas needed to determine is it's original or a rebuild. Thanks.

PS: No electro-stencilling on receiver with american depot marks. Clean as a whistle.
 
From what I see the rifle is an original, non-rebuilt IHC. The original Julian dated stock is a nice bonus as many of these were replaced in service.

It's hard to determine past use. There were a number of ex-Saudi or ex-Jordanian Garands imported 12-15 years ago. These included post-war IHCs, HRAs and SAs. There were no distinctive user markings on them and there had been quite a bit of parts swapping among them.
 
From what I see the rifle is an original, non-rebuilt IHC. The original Julian dated stock is a nice bonus as many of these were replaced in service.

It's hard to determine past use. There were a number of ex-Saudi or ex-Jordanian Garands imported 12-15 years ago. These included post-war IHCs, HRAs and SAs. There were no distinctive user markings on them and there had been quite a bit of parts swapping among them.

Supposedly this one came over before the middle Eastern imports Jean plamondon brought in in the mid 2000's. The seller thought about 30 years, but who knows. People misremember stuff.

The rack number has the long upsweeping top to the 3, extending off to the left, and the 9 has a small eye and large sweeping bottom, more like a lower case g than a 9.

Definitely marked in an arabic country.

I don't have the very latest reference materials on the post-war garlands, but from what I can tell, it looks right and original, a pleasant surprise for a gamble buy.

Cheaper than last month's tradex batch too, which is nice.
 
Morocco and Iran reportedly received substantial quantities of IHC Garands, but who knows at this point. About 30 yrs ago I bought my first IHC which was all IHC, except for the trigger housing assembly. I have no idea on its provenance.
 
There are Julian date converters on line. The numbers in the stock date are the last 4 digits of the JD. The interesting thing is that the JD of the stock shows when the stock was made, not the rifle. A lot of the LMR barrel dates on the IHCs aren't correlated to the receiver either. They are the date the barrel was made.:confused:
 
I have an IHC with a s/n approx 5000 from this one. It was produced in mid 1955. The date on the LMR barrel is early 1954. I'm away from home and can't recall the Julian date in the stock channel.

LMR barrels were supplied in contract to IHC which didn't make its own barrels. The LMR barrels are well regarded for accuracy and were once preferred for match rifles.

IHC was a machinery and truck builder with no experience building firearms so their rifle production was problematic at times. At various times both Springfield Armory and Harrington and Richardson supplied receivers to IHC. I've been fortunate enough to locate both of these variants, unfortunately with replacement stocks.

The good news is that IHC Garands did pass military acceptance and that they were all made with the high quality LMR barrels. There is a fellow in the US who is a real IHC guru and has a book on them in the works.
 
Back
Top Bottom