Maccabee Defense SLR Non-Restricted Receiver Set [WAIT LIST]

[Dietz]

Very nice. Because it slides together it may even be a stronger setup than the eh R

I highly doubt it.


Has any sort of durability testing been conducted on these? Threw around in a field? On pavement? Dropped from a height? What type of aluminium are these made from?

 

[Scotty454]

I highly doubt it.


Has any sort of durability testing been conducted on these? Threw around in a field? On pavement? Dropped from a height? What type of aluminium are these made from?

You doubt it? Why? In what way are a couple of loose pins stronger than mating dovetails and a bolt? This may be less convenient, but definitely stronger. It may also me a moot point, but stronger nonetheless.

Lol you're more than welcome to test yours out that way if you buy one

They're 7075 T6.

 

[mileageman]

No kidding, the delay made me impatient so I went from 700 to complete the receivers to well over 1000. Should be awesome though!View attachment 164718

You’ll probably need a cantilever scope mount. Regular scope rings rarely work on these type of rifles.

 

[Dietz]

You doubt it? Why? In what way are a couple of loose pins stronger than mating dovetails and a bolt? This may be less convenient, but definitely stronger. It may also me a moot point, but stronger nonetheless.

Lol you're more than welcome to test yours out that way if you buy one

They're 7075 T6.

The strenght will all depend on the design and structural mass of the dovetails in relation to the upper/lower interface, which we don't know yet.

At least they're 7075-T6. I like that.

 

[MiniMe]

estimated 10-20 a week starting mid to late April

that'll probably change though

Nice!
Hope you have 6.5 grendel barrel/BGC combos by then. (brakes too)

 

[Scotty454]

The strenght will all depend on the design and structural mass of the dovetails in relation to the upper/lower interface, which we don't know yet.

At least they're 7075-T6. I like that.

Fair. If they're paper thin they won't be stronger. But in theory, if they were engineered properly, they should be.

 

[Uisge]

You’ll probably need a cantilever scope mount. Regular scope rings rarely work on these type of rifles.

You bet, came straight off my Modern Hunter, but we will see how it works. I have other options,

 

[Bigbadpoppa]

Any forcasted date for 2nd run? Any potential of other color options such a burnt bronze / desert colour?

 

[Sharky]

Quick stupid question so if one gets the complete receiver I can take all the parts off my lmt and I will have a working rifle no other parts required?

 

[Dietz]

Quick stupid question so if one gets the complete receiver I can take all the parts off my lmt and I will have a working rifle no other parts required?

Yes.

 

[chicu1981]

When can one order this?

 

[blupul]

Make sure your barrel is over 18.5 and your good to go

 

[mach 1]

Love this, just wouldn't mind seeing some with built in trigger guards for gen 2 whenever that happens.

 

[MiniMe]

What about swapping receivers before C-71 kicks in?

 

[Uisge]

Love this, just wouldn't mind seeing some with built in trigger guards for gen 2 whenever that happens.

I thought that at first, then I saw the Strike Industries cobra series trigger guards, then all the others, now I’m fine with the normal guard! Lol

 

[MiniMe]

Quick stupid question so if one gets the complete receiver I can take all the parts off my lmt and I will have a working rifle no other parts required?

I think LMT ARs have that quick change barrel system, do they use a regular AR15 barrel?

 

[Scotty454]

I thought that at first, then I saw the Strike Industries cobra series trigger guards, then all the others, now I’m fine with the normal guard! Lol

This guy!

 

[Ritchie]

Will we be seeing 18.5" barrels for these bad boys? Looks like most jump from 18" (restricted) to 20" (Non restricted)

 

[Mike112288]

Total joke that an 18” barrel is an issue

 

[Badger4570]

Total joke that an 18” barrel is an issue

Productive comment right there.