**TYPE 81 7.62x39 Service Rifle** ~IN STOCK -NOW AVAILABLE!!!

[Matt762]

Does anyone know how durable the slings are on these guns? Would an SKS sling work?

 

[savagetman]

T81 folder just showed up.

Was ordered March 5th 2018

Arrived 22 June 2018.

There was no update on my account with Tactical Imports on shipping at all. No Email was sent out either.

Order arrived with all 8 mags. (3 Mags + Sling Pre Order + 5 spare mags)

The Quad Rail was not included. (But I was billed for it!)

Dutchie

im still waiting for my folder to show up, no update on my account, and no email about shipping or tracking info. Looks like its going to be July when i get mine.

 

[lagli]

Any recommendation on how to clean this rifle after shooting corrosive ammo?

 

[ricohman]

Any recommendation on how to clean this rifle after shooting corrosive ammo?

Field strip, Boiling water down the barrel and on the piston and cylinder if you wish. Clean as any other rifle and reassemble.
Corrosive ammo is easy to deal with.

 

[DILLIGAF]

There would be no question as to which is better if there was no magazine limit

Yup that would be easy, The Cz858

 

[trainman278]

Does anyone know how durable the slings are on these guns? Would an SKS sling work?

No, the swivel on the reciever end is very small and a soviet style SKS or AK sling will not work. However I have found that the included sling works great and has held up fine. I received my rifle last year in the first batch.

 

[JasonGTA]

im still waiting for my folder to show up, no update on my account, and no email about shipping or tracking info. Looks like its going to be July when i get mine.

Same here ! I check everyday

 

[dropinvancouver]

Got mine package with everything ordered.
I used Google email, I thought TI didn't send me notification, in fact they did. Email was automatically gone to Promotion folder which was intelligent ly create d by Google.
There sitting the notification email until I found it today.

 

[savagetman]

Same here ! I check everyday

lol ya me too, i check once in late morning then again after supper.

 

[lagli]

Field strip, Boiling water down the barrel and on the piston and cylinder if you wish. Clean as any other rifle and reassemble.
Corrosive ammo is easy to deal with.

Any issues if the water hit the wooden parts or got into the trigger assembly? I don't have an air compressor to dry the gun out but i do have a powerfull electric air blower that i use to clean my electronics (similar to compressed air cans). Do you think that's ok?

 

[tony9000]

Any issues if the water hit the wooden parts or got into the trigger assembly? I don't have an air compressor to dry the gun out but i do have a powerfull electric air blower that i use to clean my electronics (similar to compressed air cans). Do you think that's ok?

slap the water out! (serious)

 

[ricohman]

Any issues if the water hit the wooden parts or got into the trigger assembly? I don't have an air compressor to dry the gun out but i do have a powerfull electric air blower that i use to clean my electronics (similar to compressed air cans). Do you think that's ok?

Just be careful. It's not like your pouring water everywhere.
No need for a compressor. The barrel will dry pretty much immediately. Just run your cleaning patches through and oil.
I use an old kettle. Plug it in and by the time the rifle is stripped the water is boiling.

 

[Fortress]

I spray windex down the barrel the ammonia kills the salt,then run a patch through with some oil

 

[Lungorthin]

I spray windex down the barrel the ammonia kills the salt,then run a patch through with some oil

Actually, it's the water in Windex that dissolves the salts.

 

[ricohman]

Actually, it's the water in Windex that dissolves the salts.

Yup. Water is all that's needed.

 

[Fortress]

That's good to know,I'll have to use bottle water though,cause my well water is salty too

 

[_JR_]

Anyone else having issues with it cycling? Wasnt expecting a break in period with a Chinese rifle

 

[mr.g]

Anyone else having issues with it cycling? Wasnt expecting a break in period with a Chinese rifle

I would take a look at your adjustable gas system setting, it could be off.

 

[call2arms]

Anyone else having issues with it cycling? Wasnt expecting a break in period with a Chinese rifle

No issues for me except when I had the gas off by mistake

 

[SKS45]

Yup that would be easy, The Cz858

What he said ^^^^