Hiperfire now available at Maple Ridge Armoury
- Thread starter Maple Ridge Armourer
- Start date
Maple Ridge Armourer
CGN frequent flyer
HIPERTOUCH FCGs have uniquely solved two problems with stock AR triggers and AR trigger upgrades respectively: 1) High Trigger Weight, and 2) Low Hammer Fall Energy.
Trigger Weight: The real culprit behind high trigger pull weight is high sear impingement force that produces high friction. To get around that, the stock AR trigger and hammer mechanical advantage was changed and the toggle spring feature added to reduce the impingement force on the trigger sear. Designers of two-stage products changed the functional location of the primary sear; HIPERFIRE's design has not, retaining the stock design's single-stage simplicity. This is important for when stock triggers are pulled, the hammer cam-action signals hammer fall is imminent. When 2-stage triggers are pulled, the final higher weight stage also signals hammer fall. This can lead to the flinching problem we all know about. Some like to say the better 2-stage triggers have glass rod or candy-cane like breaks to sell the idea that they don't signal hammer fall. In any case, the HIPERTOUCH 24C does not signal hammer fall because the trigger weight is constant over the entire stroke.
Hammer Fall Energy: HIPERTOUCH features the unique toggle spring functionality that reduces trigger weight, but while doing so, it also increases hammer fall energy by over 35% over the MIL-spec stock design and every trigger upgrade in the market. This permits the shooter to ignite hard MIL and foreign primers as well as hard to ignite 22 rimfire ammunition.
HIPERTOUCH FCGs retain Eugene Stoner's design of simple elegance while remaining very robust, without the gritty feel. Shooting for high accuracy is no longer an almost impossible chore. It's no longer necessary to improve the stock performance by manually polishing the high-friction trigger and hammer sear surfaces, where the end result was only marginally better anyway.
Ambitious sportsmen and marksmen have been turning to trigger upgrades with varying degrees of satisfaction. The better replacements have been one and two-stage triggers with fixed final weights ranging from between 21⁄2 and 41⁄2 pounds with what some have called a glass rod or candy cane trigger break. Some of these devices require factory or user calibration, maintenance, and/or replacement for wear or doubling. Some of these devices also employ reduced power springs, which have compromised reliable ignition for a "dream" trigger weight.
The HIPERFIRE "AR" accessory response to those shooters looking for a single-stage and very much improved, match quality, "AR" trigger upgrade that delivers high performance is the HIPERTOUCH 24C. It nests in unmodified standard AR-15 and AR-10 type lower receivers in the same way as stock "AR" triggers and hammers without having to remove the safety selector. It is comprised of three sub-assemblies: the trigger, hammer, and toggle, spring groups. All the parts are made from carbon steel alloys that have been hardened for wear and strength. It features exceptionally low trigger weights with smooth pre-travel, a very clean hammer release with no report to break, match action response, and faster hammer lock-up. Only now with HIPERTOUCH trigger and hammer actions does "AR" trigger "squeeze" have real meaning.
Additionally, the HIPERTOUCH 24C also sports the HIPERSHOE adjustable finger pad, which can be positioned at five (5) different vertical detent locations along the 24C's straight trigger. By changing location, the shooter can further adjust pre-travel and weight within a broader range than without it as desired for even more trigger responsiveness. Also, the adjustable pad lengthens slightly the extension of the finger to the pad with respect to the pistol grip, which alters the feel and dexterity of the finger on the trigger for added comfort and/or control. The trigger can be installed and operated with and without the shoe.
Trigger Weight: The real culprit behind high trigger pull weight is high sear impingement force that produces high friction. To get around that, the stock AR trigger and hammer mechanical advantage was changed and the toggle spring feature added to reduce the impingement force on the trigger sear. Designers of two-stage products changed the functional location of the primary sear; HIPERFIRE's design has not, retaining the stock design's single-stage simplicity. This is important for when stock triggers are pulled, the hammer cam-action signals hammer fall is imminent. When 2-stage triggers are pulled, the final higher weight stage also signals hammer fall. This can lead to the flinching problem we all know about. Some like to say the better 2-stage triggers have glass rod or candy-cane like breaks to sell the idea that they don't signal hammer fall. In any case, the HIPERTOUCH 24C does not signal hammer fall because the trigger weight is constant over the entire stroke.
Hammer Fall Energy: HIPERTOUCH features the unique toggle spring functionality that reduces trigger weight, but while doing so, it also increases hammer fall energy by over 35% over the MIL-spec stock design and every trigger upgrade in the market. This permits the shooter to ignite hard MIL and foreign primers as well as hard to ignite 22 rimfire ammunition.
HIPERTOUCH FCGs retain Eugene Stoner's design of simple elegance while remaining very robust, without the gritty feel. Shooting for high accuracy is no longer an almost impossible chore. It's no longer necessary to improve the stock performance by manually polishing the high-friction trigger and hammer sear surfaces, where the end result was only marginally better anyway.
Ambitious sportsmen and marksmen have been turning to trigger upgrades with varying degrees of satisfaction. The better replacements have been one and two-stage triggers with fixed final weights ranging from between 21⁄2 and 41⁄2 pounds with what some have called a glass rod or candy cane trigger break. Some of these devices require factory or user calibration, maintenance, and/or replacement for wear or doubling. Some of these devices also employ reduced power springs, which have compromised reliable ignition for a "dream" trigger weight.
The HIPERFIRE "AR" accessory response to those shooters looking for a single-stage and very much improved, match quality, "AR" trigger upgrade that delivers high performance is the HIPERTOUCH 24C. It nests in unmodified standard AR-15 and AR-10 type lower receivers in the same way as stock "AR" triggers and hammers without having to remove the safety selector. It is comprised of three sub-assemblies: the trigger, hammer, and toggle, spring groups. All the parts are made from carbon steel alloys that have been hardened for wear and strength. It features exceptionally low trigger weights with smooth pre-travel, a very clean hammer release with no report to break, match action response, and faster hammer lock-up. Only now with HIPERTOUCH trigger and hammer actions does "AR" trigger "squeeze" have real meaning.
Additionally, the HIPERTOUCH 24C also sports the HIPERSHOE adjustable finger pad, which can be positioned at five (5) different vertical detent locations along the 24C's straight trigger. By changing location, the shooter can further adjust pre-travel and weight within a broader range than without it as desired for even more trigger responsiveness. Also, the adjustable pad lengthens slightly the extension of the finger to the pad with respect to the pistol grip, which alters the feel and dexterity of the finger on the trigger for added comfort and/or control. The trigger can be installed and operated with and without the shoe.
Maple Ridge Armourer
CGN frequent flyer
The Hiperfire EDT Designated Marksman (formerly EDT3) features a duplex, or two-position trigger bow. Place the finger high in the curve and the pull weight is approximately 5 or 6 lbs with the supplied red hammer spring installed. Or, with the finger riding low on the vertical tip, the weight is approximately 4 or 5 lbs. when the supplied green hammer spring is installed.
This trigger is directed to DMR use. Run the finger high in tactical situations, or run it low in longer range precision scenarios. It’s also appropriate for home defense and hunting applications as the trigger weight is higher than the 24 series triggers. It’s the “AR” fire-control upgrade we’ve all dreamed of. For installation and operational features of the HIPERTOUCH® EDT Marksman watch the videos in the playlist above. HIPERTOUCH® FCGs may not work in lowers with FCG holes that are outside the MIL-Spec toleranced dimensions.
Drop-In “AR15/10” Fire-Control for .223/5.56 NATO, 300 BLK, .308/7.62 NATO
Enhanced Duty Trigger
“Duplex” Trigger Bow, High or Low Finger Placement
2 User-Adjustable Trigger Weights of 4+ and 6+ lbs
Single Stage, Semi-Auto
For Standard AR Lower Receivers Using Small Pins of 0.154-inch Diameter
“Hint” of Creep, Slightly Shorter Travel to Break from Moment of Reset
Clean Break, Best-In-Class Fast/Positive Reset
Faster Hammer Lock-Up than Stock, MIL-spec Strike Energy
Heat-Treated Alloy Steels
Installs without Removal of the Safety Selector
US Patent 9,175,917, Others Pending
Made Entirely in the USA
Attachments
Maple Ridge Armourer
CGN frequent flyer
Thank you for the order and for the compliments! We can take credit for the web design but the images for the Hiperfire triggers were provided by Hiperfire (High Performance Firearms).
A product review on our website would give us valuable feedback on the product and it would help other people with their buying decisions. You opinion matters to us!
tharkhold
CGN Ultra frequent flyer
- Location
- NCR//RCN (Ottawa/Gatineau)
omg these look smexy!
I'd take one and put it in a glass/crystal cube and just leave it on my desk as an ornament!
lol, you ordered the only one they had!
I'd take one and put it in a glass/crystal cube and just leave it on my desk as an ornament!
lol, you ordered the only one they had!
Last edited:
tharkhold
CGN Ultra frequent flyer
- Location
- NCR//RCN (Ottawa/Gatineau)
Code didnt work, now got a working solution thanks!
Last edited:
tharkhold
CGN Ultra frequent flyer
- Location
- NCR//RCN (Ottawa/Gatineau)
I can't wait for that Eclipse to show up... but seriously, these could be made as ornaments/paperweights (the nice kind)
The only critic I have is that at that price, the manufacturer should include different colored trigger pads (black, green, red)
I would have loved a red pad on the eclipse.
tharkhold
CGN Ultra frequent flyer
- Location
- NCR//RCN (Ottawa/Gatineau)
I have to say it again:
Hawt daym thez look smekssy azz fek!
Those springs kinda remind me of this:
Hawt daym thez look smekssy azz fek!
Those springs kinda remind me of this:
Maple Ridge Armourer
CGN frequent flyer
We have another shipment incoming next week to restock what is out plus we will have their comps and pistol grips. We will post here when the shipment lands!
tharkhold
CGN Ultra frequent flyer
- Location
- NCR//RCN (Ottawa/Gatineau)
Is it weird that I want another one as a keychain?
- Location
- Onterrible
Your money not mine, I won't judge.
Maple Ridge Armourer
CGN frequent flyer
New shipment of Hiperfire triggers has arrived!
SHOP HERE
Designed for the ultimate in AR Performance, and formerly known as the 24C, the HIPERTOUCH Competition is HIPERFIRE’s most popular trigger. With virtually no take-up/pre-travel, the Competition is an adjustable, single-stage trigger compatible with both AR15 and AR10 rifles. HIPERFIRE’s Cam-Over Toggle Engine creates a very hard hitting hammer, soft-start lock-up for pre-ignition stability, giving the shooter a very short over-travel and a very positive reset you can feel and hear. Installation is easy, and your satisfaction is backed by HIPERFIRE’s 110% Money Back Guarantee, should you not be completely satisfied, simply contact HIPERFIRE directly.
Feauturing the HIPERSHOE adjustable finger pad; this pad has 5 different placement locations along the trigger for a truly customized trigger. HIPERSHOE allows the shooter to adjust pre-travel and weight, or complete removal of the bad without effecting trigger performance.
Specifications
Drop-In “AR10” and “AR15” Fire-Control
Straight Trigger with the HIPERSHOE Adjustable Finger Pad
For Competitive 3-Gun, LE-MIL Tactical Interdiction, Long-Range Hunting
Smooth/Shorter Pre-Travel for On-Demand Performance Compared to the 24
Clean Hammer Release, Faster Reset Compared to the 24
Match Quality Trigger Action and Hammer Fall
Functions like the Stock, Semi-Auto “AR15” Fire-Control
For Standard Lower Receivers Using Small Pins of 0.154-inch Diameter
Uses Stock “AR” Trigger and Semiautomatic Disconnector Springs
Uses Proprietary Trigger Hammer and Disconnector Parts
Uses a Proprietary Toggle-Over-Center Spring System
User-Set Trigger Weights: Light, Medium-Light, Medium
Smooth/Shorter Pre-Travel Compared to the 24 Clean Hammer Release, Fast Reset
25% to 50% Faster Hammer Lock-Up
Heat-Treated Alloy Steel
Installs without Removal of the Safety Selector
Installs without Modification to the Lower Receiver
Made entirely in the USA
SHOP HERE
Designed for the ultimate in AR Performance, and formerly known as the 24C, the HIPERTOUCH Competition is HIPERFIRE’s most popular trigger. With virtually no take-up/pre-travel, the Competition is an adjustable, single-stage trigger compatible with both AR15 and AR10 rifles. HIPERFIRE’s Cam-Over Toggle Engine creates a very hard hitting hammer, soft-start lock-up for pre-ignition stability, giving the shooter a very short over-travel and a very positive reset you can feel and hear. Installation is easy, and your satisfaction is backed by HIPERFIRE’s 110% Money Back Guarantee, should you not be completely satisfied, simply contact HIPERFIRE directly.
Feauturing the HIPERSHOE adjustable finger pad; this pad has 5 different placement locations along the trigger for a truly customized trigger. HIPERSHOE allows the shooter to adjust pre-travel and weight, or complete removal of the bad without effecting trigger performance.
Specifications
Drop-In “AR10” and “AR15” Fire-Control
Straight Trigger with the HIPERSHOE Adjustable Finger Pad
For Competitive 3-Gun, LE-MIL Tactical Interdiction, Long-Range Hunting
Smooth/Shorter Pre-Travel for On-Demand Performance Compared to the 24
Clean Hammer Release, Faster Reset Compared to the 24
Match Quality Trigger Action and Hammer Fall
Functions like the Stock, Semi-Auto “AR15” Fire-Control
For Standard Lower Receivers Using Small Pins of 0.154-inch Diameter
Uses Stock “AR” Trigger and Semiautomatic Disconnector Springs
Uses Proprietary Trigger Hammer and Disconnector Parts
Uses a Proprietary Toggle-Over-Center Spring System
User-Set Trigger Weights: Light, Medium-Light, Medium
Smooth/Shorter Pre-Travel Compared to the 24 Clean Hammer Release, Fast Reset
25% to 50% Faster Hammer Lock-Up
Heat-Treated Alloy Steel
Installs without Removal of the Safety Selector
Installs without Modification to the Lower Receiver
Made entirely in the USA
Attachments
Maple Ridge Armourer
CGN frequent flyer
Did you know....
The Hiperfire EDT Heavy Gunner and all 5 models of Hipertouch triggers produce up to 30% more kinetic energy ensuring ignition of hard primers as found in surplus ammunition such as 7.62x39 and 7.62 NATO ammo.
Hiperfire is the trigger of choice for your next 7.62x39 AR-15, BCL102, or Stag Arms AR-10 build.
Check them out HERE
Hiperfire EDT-Heavy Gunner
The Enhanced Duty Trigger (EDT) Heavy Gunner is a single-stage trigger and an exceptional upgrade for your MIL/LE/SWAT or utility rifle. HIPERFIRE’s EDT triggers are re-engineered from the ground up, are smooth, accurate and include features of higher tiered trigger designs. The EDT Heavy Gunner has an improved sear alignment for a flat crisp trigger feel, mass centered hammer design for faster lock times and includes two springs for the user to choose a 4.5 or 5.5 lb pull weight. The MIL ++ Heavy Duty Hammer Springs create a very hard hammer strike, and high power touch off while giving the user a crisp, clear break with very short over-travel and positive reset you can both feel and hear. The EDT Heavy Gunner is reliable for use with many different types of ammunition and in any situation! Installation is easy, and your satisfaction is backed by HIPERFIRE’s 110% Money Back Guarantee, should you not be completely satisfied, simply contact HIPERFIRE directly.
Although compatible in both AR15 and AR10 platforms, we recommend the Heavy Gunner for use in .308, 7.62×39 or 5.45×39 AR Builds. These calibers will benefit from the Heavy Gunner’s additional hammer mass. Consider the HIPERFIRE EDT Sharp Shooter for your standard 5.56 NATO / .223 Wylde AR builds.
Specifications
Drop-In “AR15/10” Fire-Control for .223/5.56 NATO, 300 BLK, .308/7.62 NATO
Enhanced Duty Trigger
2 User-Adjustable Trigger Weights of 4½+ and 5½+ lbs
Single Stage, Semi-Auto
For Standard AR Lower Receivers Using Small Pins of 0.154-inch Diameter
“Hint” of Creep, Slightly Shorter Travel to Break from Moment of Reset
Clean Break, Best-In-Class Fast/Positive Reset
Faster Hammer Lock-Up than Stock, MIL-spec Strike Energy
Heat-Treated Alloy Steels
Installs without Removal of the Safety Selector
US Patents Pending
Made Entirely in the USA
The Hiperfire EDT Heavy Gunner and all 5 models of Hipertouch triggers produce up to 30% more kinetic energy ensuring ignition of hard primers as found in surplus ammunition such as 7.62x39 and 7.62 NATO ammo.
Hiperfire is the trigger of choice for your next 7.62x39 AR-15, BCL102, or Stag Arms AR-10 build.
Check them out HERE
Hiperfire EDT-Heavy Gunner
The Enhanced Duty Trigger (EDT) Heavy Gunner is a single-stage trigger and an exceptional upgrade for your MIL/LE/SWAT or utility rifle. HIPERFIRE’s EDT triggers are re-engineered from the ground up, are smooth, accurate and include features of higher tiered trigger designs. The EDT Heavy Gunner has an improved sear alignment for a flat crisp trigger feel, mass centered hammer design for faster lock times and includes two springs for the user to choose a 4.5 or 5.5 lb pull weight. The MIL ++ Heavy Duty Hammer Springs create a very hard hammer strike, and high power touch off while giving the user a crisp, clear break with very short over-travel and positive reset you can both feel and hear. The EDT Heavy Gunner is reliable for use with many different types of ammunition and in any situation! Installation is easy, and your satisfaction is backed by HIPERFIRE’s 110% Money Back Guarantee, should you not be completely satisfied, simply contact HIPERFIRE directly.
Although compatible in both AR15 and AR10 platforms, we recommend the Heavy Gunner for use in .308, 7.62×39 or 5.45×39 AR Builds. These calibers will benefit from the Heavy Gunner’s additional hammer mass. Consider the HIPERFIRE EDT Sharp Shooter for your standard 5.56 NATO / .223 Wylde AR builds.
Specifications
Drop-In “AR15/10” Fire-Control for .223/5.56 NATO, 300 BLK, .308/7.62 NATO
Enhanced Duty Trigger
2 User-Adjustable Trigger Weights of 4½+ and 5½+ lbs
Single Stage, Semi-Auto
For Standard AR Lower Receivers Using Small Pins of 0.154-inch Diameter
“Hint” of Creep, Slightly Shorter Travel to Break from Moment of Reset
Clean Break, Best-In-Class Fast/Positive Reset
Faster Hammer Lock-Up than Stock, MIL-spec Strike Energy
Heat-Treated Alloy Steels
Installs without Removal of the Safety Selector
US Patents Pending
Made Entirely in the USA
Attachments
Maple Ridge Armourer
CGN frequent flyer
scourge18a
CGN frequent flyer
- Location
- AB
Any idea if the Hiperfire will fit in the SLR?
Maple Ridge Armourer
CGN frequent flyer
No the current production Hiperfire triggers do not fit.
With that said, a minor modification to the EDT series of Hiperfire triggers appears as though it will allow them to fit.
The Hipertouch series of trigger will fit with modification to the trigger and the trigger housing.
scourge18a
CGN frequent flyer
- Location
- AB
Thank you
