Wk180-c feedback

[Cranky Pants]

I just ordered a Hyperfire sharpshooter trigger too and a trigger gauge, just for kicks!

 

[Ironheart]

Would love to order the Tac-Con™ 3MR Trigger but Noone can confirm if these are legal in Canada or not.....who will bring one in for me?

 

[griffin86]

Would love to order the Tac-Con™ 3MR Trigger but Noone can confirm if these are legal in Canada or not.....who will bring one in for me?

Might be prohibited just like a bumpfire stock.

PART 4
Prohibited Devices

Former Prohibited Weapons Order, No. 9

1 Any electrical or mechanical device that is designed or adapted to operate the trigger mechanism of a semi-automatic firearm for the purpose of causing the firearm to discharge cartridges in rapid succession.

 

[Marilius]

Would love to order the Tac-Con™ 3MR Trigger but Noone can confirm if these are legal in Canada or not.....who will bring one in for me?

Very prohibited.

 

[lone-wolf]

It shouldn't be prohib, it's still a one pull one shot trigger that's purpose is to reset the trigger faster

 

[Dime]

Sure it’s cool but damn it would get expensive with all the ammo I’d go through

 

[JaredP]

Yeah If you hold your hand too far forward (c clamp) you get a nice shot of gas.

 

[DAVEL]

testing out imgur.
Finally got all my parts in and on.
I am loving this gun.

https://imgur.com/a/foeLUo1

 

[driller212]

testing out imgur.
Finally got all my parts in and on.
I am loving this gun.

https://imgur.com/a/foeLUo1

No issues with the install of the ACE stock?

 

[canadaboi]

testing out imgur.
Finally got all my parts in and on.
I am loving this gun.

https://imgur.com/a/foeLUo1

I certainly like the aesthetics of the ACE stock but that LOP looks awfully long

 

[DAVEL]

No issues with the install of the ACE stock?

None. You just need an A2 buffer tube and it slipped right on. Used the air nozzle under the rubber pad to get it on and it worked slick as snot.

 

[DAVEL]

I certainly like the aesthetics of the ACE stock but that LOP looks awfully long

I don't find it long at all and I am only 5'9".

 

[Chumlee Bumsnag]

I tried the paracord trick and some very light polishing on the sear and hammer claw on the stock trigger before swapping it. I also put on a 6 lb. hammer spring I had extra from another trigger. It's a big improvement.
Only problem I have now is I can't remember how the spring that tensions the bolt hold open and the fire selector goes in. I'll try again after dinner.

 

[Bubba Yugga]

Can anyone steer me to this "paracord trick"?

 

[Ironheart]

None. You just need an A2 buffer tube and it slipped right on. Used the air nozzle under the rubber pad to get it on and it worked slick as snot.

Fabulous to know.....the ACE stock looks wicked.....thx for confirming this

 

[Chumlee Bumsnag]

Can anyone steer me to this "paracord trick"?

https://youtu.be/Yeasg5HNbnw

 

[JaredP]

I tried the paracord trick and some very light polishing on the sear and hammer claw on the stock trigger before swapping it. I also put on a 6 lb. hammer spring I had extra from another trigger. It's a big improvement.
Only problem I have now is I can't remember how the spring that tensions the bolt hold open and the fire selector goes in. I'll try again after dinner.��

check out my image from the first page.

the spring should give a detent to the safety operation and operate the bolt stop.

 

[LoKoL]

https://youtu.be/Yeasg5HNbnw

Going to have to look into this once she arrives! Thanks for the link.

 

[Chumlee Bumsnag]

check out my image from the first page.

the spring should give a detent to the safety operation and operate the bolt stop.

Thanks. I got it back in after a few tries.

 

[Bubba Yugga]

https://youtu.be/Yeasg5HNbnw

Awesome, thanks!