Maple Ridge Armoury V1 lightweight, M-LOK Handguards available now!

[Maple Ridge Armourer]

The Maple Ridge Armoury V1 M-LOK Handguard is a precision machined, lightweight, free-float handguard for the AR-15 series and similar firearms.# The extruded 6061-T6 body of the handguard has been CNC milled to dramatically reduce weight, facilitate air cooling of the barrel yet maintain considerable structural integrity. The lightweight, oversize aluminium barrel nut provides a very secure anchor and the two perpendicular bolts interface with the barrel nut to prevent any forward movement.# The barrel nut has been designed to not require timing to the gas tube making installation extremely easy. The unique, anti-rotation, rail lock will work with any AR-15 type upper receiver ensuring perfect alignment of the handguard. The Type 3, Class 2 Hard Anodize provides exceptional wear and corrosion resistance while leaving a smooth, uniform, black appearance.

Precision CNC Machined from 6061-T6 Aluminium
Lightweight Aluminium Barrel Nut
Anti-rotation and anti-slip features for secure lockup
Top picatinny rail for front sight
M-LOK slots at 3, 6, and 9 o'clock positions for entire length of the handguard
2 QD Sling Mounts
Type 3, Class 2 Hard Anodize
Includes crowfoot wrench and allen key for assembly
Torque spec on barrel nut is 35ft/lbs
Inside Diameter is 1.36"
Made in Canada

Weights and Dimensions (weights include barrel nut and all hardware)
9.5"# #(LxWxH)# #9.5" x 1.5" x 2.3"# #Weight: 7oz
11.5"# (LxWxH) 11.5" x 1.5" x 2.3"# #Weight: 8oz
13.5" (LxWxH) 13.5" x 1.5" x 2.3"# #Weight: 9oz
15"# # (LxWxH)# # 15"# x 1.5" x 2.3"# #Weight: 10oz
17"# # (LxWxH)# # 17"# x 1.5" x 2.3"# #Weight: 110z

Available now. SHOP HERE

 

[Gmwebs]

oh damn, these look slick af. picking up one of these for sure.

does the qd mount spin free or does it stop rotation?

Also the 13.5 seems to be sold out even though it was posted today.

 

[Fisselig]

Wow. Not only do they look fantastic, are Canadian made, but they also are nearly as lightweight (off by literally fractions of an ounce) as stuff from SLR Rifleworks using traditional aluminium.
AND they're quite a bit cheaper than that brand! Once again, wow. Incredibly impressed. I might just pick one of these up!

 

[Maple Ridge Armourer]

oh damn, these look slick af. picking up one of these for sure.

does the qd mount spin free or does it stop rotation?

Also the 13.5 seems to be sold out even though it was posted today.

The QD ports are machined to be anti rotation. The sling swivel can rotate about 45 degrees.

The handguards are in production now, they are available for backorder only right now to secure one from the first production run. ETA is 3 weeks.

 

[juancarlos]

Wow, 17" option. Very cool.

Is the 12 o'clock position also M-Lok?

 

[upinsmokeweldinginc]

I’m wondering if the rotation tabs will have to be cut off to fit the modern sporter

 

[Maple Ridge Armourer]

Wow, 17" option. Very cool.

Is the 12 o'clock position also M-Lok?

The interior of the top part of our extrusion is not wide enough to accommodate M-LOK slots. We wanted to keep the handguard as slim and lightweight as possible.

 

[Maple Ridge Armourer]

 

[Desertrat]

Are there any plans to make handguards for AR10 rifles?

 

[Maple Ridge Armourer]

Are there any plans to make handguards for AR10 rifles?

Yes. We are working on this now.

 

[weasel1]

Yes. We are working on this now.

You guys might get me in trouble....

 

[ARCANGEL]

Yes. We are working on this now.

Are there any plans to make handguards for AR10 rifles?

That is awesome!

 

[Brianma65]

Can you give an ETA of when the AR 308 handguard,are going to be ready?

 

[Maple Ridge Armourer]

Can you give an ETA of when the AR 308 handguard,are going to be ready?

Its really hard to say right now what with all the projects we are tackling. I would estimate going to market between December and February. They will be similar style to the V1 Handguards and we will include either a DPMS and Armalite barrel nut to order.

 

[Maple Ridge Armourer]

You guys might get me in trouble....

Wait until you see the new uppers.

 

[nidh0gg]

Its really hard to say right now what with all the projects we are tackling. I would estimate going to market between December and February. They will be similar style to the V1 Handguards and we will include either a DPMS and Armalite barrel nut to order.

nooo its so far away

 

[Adam134]

They look great, great news about the ar10 handguards too bad they're not coming till the winter

 

[Maple Ridge Armourer]

They look great, great news about the ar10 handguards too bad they're not coming till the winter

Ok I will see if we can get them into production sooner.

 

[Adam134]

Ok I will see if we can get them into production sooner.

Now that is customer service! But dont stress too much whether I get one in late fall or early winter makes littke difference either way I'll be happy to support Canadian

 

[TFunfer]

Yes. We are working on this now.

If at some point you offer an AR10 .308 Barrel and handguard package, I may need to pick up another upper