remove pls.

Great results!

The lower left group at 200 is actually fantastic (less the dropped one). The vertical stringing of the 4 is excellent.
I would search no further for ammo, thats your winner.

Thanks for sharing!
 
jonh172 said:
Great results!

The lower left group at 200 is actually fantastic (less the dropped one). The vertical stringing of the 4 is excellent.
I would search no further for ammo, thats your winner.

Thanks for sharing!
Click to expand...

Unfortunately thats the most expenaive ammo! Haha. Ill try some other stuff eventually.

Happy to share!
 
I am very confused that you're having no problems with XCR mags.

I just brought out my brand new Stag 10S yesterday with two brand new XCR mags, and I had a stoppage every single round with both mags.

Either it didn't cycle enough, or the round got jammed 45 degrees upwards with the bolt stuck in the middle of the casing.

Not one single proper cycle in 20+ rounds.

I stupidly did not bring the OEM mag, but I will next time.

Another guy on the range said he was also having the same problem with his Stag using PMAGs, and he was about to return it to Arms East.

I'll bring the OEM mag and PMAGs next time, but if it ends up having stoppages with everything, mine will be going back as well.

Such a disappointment because I had such high hopes for this gun, but I have never seen a gun run so poorly.
 
Petamocto said:
I am very confused that you're having no problems with XCR mags.

I just brought out my brand new Stag 10S yesterday with two brand new XCR mags, and I had a stoppage every single round with both mags.

Either it didn't cycle enough, or the round got jammed 45 degrees upwards with the bolt stuck in the middle of the casing.

Not one single proper cycle in 20+ rounds.

I stupidly did not bring the OEM mag, but I will next time.

Another guy on the range said he was also having the same problem with his Stag using PMAGs, and he was about to return it to Arms East.

I'll bring the OEM mag and PMAGs next time, but if it ends up having stoppages with everything, mine will be going back as well.

Such a disappointment because I had such high hopes for this gun, but I have never seen a gun run so poorly.
Click to expand...

Make sure the gas block isn't loose.
 
Petamocto said:
I am very confused that you're having no problems with XCR mags.

I just brought out my brand new Stag 10S yesterday with two brand new XCR mags, and I had a stoppage every single round with both mags.

Either it didn't cycle enough, or the round got jammed 45 degrees upwards with the bolt stuck in the middle of the casing.

Not one single proper cycle in 20+ rounds.

I stupidly did not bring the OEM mag, but I will next time.

Another guy on the range said he was also having the same problem with his Stag using PMAGs, and he was about to return it to Arms East.

I'll bring the OEM mag and PMAGs next time, but if it ends up having stoppages with everything, mine will be going back as well.

Such a disappointment because I had such high hopes for this gun, but I have never seen a gun run so poorly.
Click to expand...

I haven't had a single mag related problem with the xcr mags and I've ran 400 rounds through mine.

Make sure you clean the gun spotless and get all the packing oil out of it. Then lube with your choice of lubricant and your problems will more than likely disappear. Lots of problems with the stag 10 are associated to improper cleaning or lack of cleaning the gun before use.

This is what I did and haven't had a single hiccup

Clean it
Lube it
Cycle it
Lube it some more
Cycle it more
Clean it
Lube it
Shoot it
 
You must log in or register to reply here.
Back
Top Bottom