5.56x45 Range safe 62 grain Available!

Western Metal Inc

Western Metal Inc

CGN Ultra frequent flyer
Rating - 98.6%
72   1   0
Location
Calgary
Our range safe 62 grain new manufacture 5.56 loading is finally available!

250 rounds loose packed for $149.99

https://www.westernmetal.ca/shooting/western-munitions-556x45-nato-62-grain-fmj-new-manufacture-anw-556-62-250

IMG_1515.jpg

:canadaFlag: All Western Munitions ammo is made in Canada by Canadian Shooters for Canadian Shooters :canadaFlag:​
 

Attachments

  • IMG_1515.jpg
    IMG_1515.jpg
    127.4 KB · Views: 2,703
I wouldn't want to shoot any non-frangible rounds at much less than 100m. The risk of fragments coming back at you is unappealing.

Auggie D.
 
With absolute all due respect, outside of being made in Canada, what is the draw to purchasing this ammo over other 62gr models which retail between $60-$100 less per thousand rounds which are coming in from the US?
 
Jacobean said:
With absolute all due respect, outside of being made in Canada, what is the draw to purchasing this ammo over other 62gr models which retail between $60-$100 less per thousand rounds which are coming in from the US?
Click to expand...

Most of that will be surplus M855 A.K.A. SS109 and/or Green Tip which contains a steel core penetrator in the center of the projectile which some ranges will not allowed to be shot at their facilities because of either safety reasons or the fact they will wear out metal backstops and targets at an accelerated rate compared to projectiles that are made of just copper and/or lead. This is a standard 62 grain FMJ projectile so no steel core only Copper and lead construction making it okay to shoot at ranges that have prohibitions on steel core ammunition.
 
Jacobean said:
With absolute all due respect, outside of being made in Canada, what is the draw to purchasing this ammo over other 62gr models which retail between $60-$100 less per thousand rounds which are coming in from the US?
Click to expand...

A lot of ranges really will not allow the use of common 62gr M855 ammo on any of their steel packed or indoor targets, simply due to the steel penetrator in front of the lead core(or more commonly because the steel tip sticks to magnet which is the only test most of the old guys care about.) 90-some-odd% of the affordable bulk 62gr ammo from the States will be of this type. This is an alternative that will, I'd imagine, maintain the same flight pattern and velocity of M855, meaning you can train with the same ammo you may have stockpiled at any range including indoor types, without any change in zero from regular M855. The only real competition to this that I have seen(perhaps your experience differs?) is Barnaul/MFS .223 steel cased 62gr which is allegedly entirely a lead core. That said, as per a lot of Russian ammo, some ranges will still forbid using it on indoor or steel targets. Had that happen to me when trying to shoot Barnaul soft points once. Steel case stuck to the magnet, which was apparently good enough for the RSO to ban me using it.
 
Western Metal Inc said:
The 250 packs have been selling well, would there be any interest in 1000 round cases?
Click to expand...


Very pleased with the initiative. The answer is YES, I'm for a few cases if assorted with a decent price break. Don't get me wrong, I will gladly pay a premium for rounds with heavier projectiles but $600/1000 does not cut it for me.

I much dislike the bulk 55 grains stuff commonly available everywhere: at 100 yd it groups almost as wide as Turdo's loud mouth in barrels with twist rates of 1:7 (my Diemacos) and 1:8 (my others). Heavier projectiles like 62 or (even better) 69 grains should appeal a lot to the Rifle IPSC and 3Gun shooters.
 
play.soccer said:
Would this be fine for shooting steel plates at less than 100 yards or is that still a no-no
Click to expand...


The 55 gr PMC, Federal, Independence, etc. all leave a small sting to ar-500 at 100 yard. Nothing as severe as the M855 (green tips) but still. I tend to believe 62 gr will do the same. My take is simple, I shoot the hell out of my plates and replace them when NFG.

FWIW X-Metal targets says it ok to chuck lead at its steel as long as velocity is 3000 fps or below past 100 yards.
 
UR2X3M4ME said:
Very pleased with the initiative. The answer is YES, I'm for a few cases if assorted with a decent price break. Don't get me wrong, I will gladly pay a premium for rounds with heavier projectiles but $600/1000 does not cut it for me.

I much dislike the bulk 55 grains stuff commonly available everywhere: at 100 yd it groups almost as wide as Turdo's loud mouth in barrels with twist rates of 1:7 (my Diemacos) and 1:8 (my others). Heavier projectiles like 62 or (even better) 69 grains should appeal a lot to the Rifle IPSC and 3Gun shooters.
Click to expand...

We are looking at some options to bring down the cost per round closer to $0.50.
 
You must log in or register to reply here.
Back
Top Bottom