You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Pardus SL
- Thread starter darb888
- Start date
Is it the 20 gauge ?Hi, anybody have problems with the (semi auto)Pardus SL ? Mine jams the spent shell as the action is also jammed. Any gunsmith ever repaired this problem? Anyone know if Canada has a warranty center?
Bit of a necro thread at this point, but i have a 20ga version of the SL and it's worked well for the most part.
Doesn't like to eject challenger shells if you have too many of them, they seem to have a sloped rim and kind of a waxy residue that makes the extractor slip off the rim. Any other brand works fine and if i stagger one challenger and one different brand it works 95% of the time that way.
Other than that my main issue is that i should have jumped on the sale that wholesale was having in a bigger way and gotten a few more.
Doesn't like to eject challenger shells if you have too many of them, they seem to have a sloped rim and kind of a waxy residue that makes the extractor slip off the rim. Any other brand works fine and if i stagger one challenger and one different brand it works 95% of the time that way.
Other than that my main issue is that i should have jumped on the sale that wholesale was having in a bigger way and gotten a few more.
Challanger shells didn’t work well in mine either, Federal and Winchester brand shells worked great. Too bad Wholesale Sports went out of business, got some good deals there.Bit of a necro thread at this point, but i have a 20ga version of the SL and it's worked well for the most part.
Doesn't like to eject challenger shells if you have too many of them, they seem to have a sloped rim and kind of a waxy residue that makes the extractor slip off the rim. Any other brand works fine and if i stagger one challenger and one different brand it works 95% of the time that way.
Other than that my main issue is that i should have jumped on the sale that wholesale was having in a bigger way and gotten a few more.
Last edited:
Rayleigh_Scattering
Regular
- Location
- Under the arch
Had the same problem with the same gun.
I polished the machining marks out of the chamber and replaced the little rounded nub of an ejector with a tall/square one.
It ejects perfectly now.
Pics of the repair are posted on another thread.
I polished the machining marks out of the chamber and replaced the little rounded nub of an ejector with a tall/square one.
It ejects perfectly now.
Pics of the repair are posted on another thread.
