Deal Alert Norinco !

Brewster20

Brewster20

CGN frequent flyer
Super GunNutz
Rating - 100%
164   0   0
Location
Arnprior Ontario
Not my first choice for a SA .22, but for $ 159. I'll take a chance !!
https://www.gotenda.com/shop/firearms/rifles/norinco-jw-20-semi-auto-22lr-takedown-rifle/
 
Sold a couple of these when I had my shop. Took a fair bit of fiddling to keep them sold. Feedways required polishing and fiddling. Didn't bring in any more.
Maybe they are better now.
 
A slight radius on a too sharp edge, made all the difference on a couple I fixed up.

One of those lost a claw off the extractor. A Browning part, about $20, fixed that up.

A little rough around the edges, but well within the reach of someone with any aptitude.
 
As tiriac and trevj have pointed out, fiddling is required. I bought one on the $125 deal about 5 years ago knowing that.
A fair bit of fiddling later and I had an accurate and dependable little rifle, my first 22 semi (after 50 years of 22s). I use mini mags exclusively and it never fails whereas other brands vary. I am satisfied with the deal.
 
For ~ $300 you can get a 70's era Japanese Browning SA-22 that will run circles around one of these.
 
FLYBYU44 said:
Where? That is also almost double what this rifle costs.
Click to expand...

Yeah, I tend to watch the Browning Semi's on the EE, and if grelmar can buy them at that price, he can quit his day job and live off the profits of reselling them for what they actually sell for.

Both the ones I did got a very slight radius added to the top of the chamber, as they were both shaving a huge chunk off the bullet when feeding, and quite often, that chunk didn't separate, causing a feed jam.
That work was the totality of the fettling that was done.

For a quarter or less of the retail price of the originals, anyone who expects perfection is deluded. They are not as finely finished, the fit of some of the part is merely OK, but they will work. You get Chu Wood stocks instead of Walnut or Beech. Whatever.

I'll casually suggest that folks that want something that runs smoothly and without issues out of the box, would be better advised, to buy the originals. If you don't mind giving it a once over, and knocking off sharp edge here or there, you can end up with a pretty decent field gun or truck gun, that you won't shed any tears for if you get a scratch on it.
Not saying every one that is out there needs the work, just that for the price, it may.

I think they represent pretty good value for the money.
 
I got a rossi rs22 new for 147.
it

It's an excellent piece 500 round no failures and it eats everything.
Fit my 12 year old and myself.
 
trevj said:
Yeah, I tend to watch the Browning Semi's on the EE, and if grelmar can buy them at that price, he can quit his day job and live off the profits of reselling them for what they actually sell for.

Both the ones I did got a very slight radius added to the top of the chamber, as they were both shaving a huge chunk off the bullet when feeding, and quite often, that chunk didn't separate, causing a feed jam.
That work was the totality of the fettling that was done.

For a quarter or less of the retail price of the originals, anyone who expects perfection is deluded. They are not as finely finished, the fit of some of the part is merely OK, but they will work. You get Chu Wood stocks instead of Walnut or Beech. Whatever.

I'll casually suggest that folks that want something that runs smoothly and without issues out of the box, would be better advised, to buy the originals. If you don't mind giving it a once over, and knocking off sharp edge here or there, you can end up with a pretty decent field gun or truck gun, that you won't shed any tears for if you get a scratch on it.
Not saying every one that is out there needs the work, just that for the price, it may.

I think they represent pretty good value for the money.
Click to expand...

The EE is a lousy place to find deals.

I picked up a Miroku SA-22 for $275 about 3 years ago at an online auction. If you're patient and keep your eyes open, you can generally find a deal. If you need something RIGHT NOW! it will end up costing more.

Sure, that may be almost double what the Norinco costs, but still not a high price for a decent quality gun that you don't have to mess with just to get it to work reliably. $159 is a terrible price for a gun that doesn't work out of the box. Even at minimum wage, your time is worth more than the price difference in time you'll put into screwing with the thing to get it to work right.
 
this is an awesome deal! Thanks for posting.
At this price, buy two. Yes, some need basic fiddling, but an accurate all metal gun that works beautifully. Some are flawless out of the box.

If only I could buy these back in the 70's, I wouldn't have been scarred by jammy semis like the (new) mossbergs and cooey 64's.

And by the way, they show as back in stock.
 
Based on the Browning takedown all right, the Norinco version was/is highly recommended by good old Boston T Party in his gun book, but the first one I came across was at a gun show where when assembled the sights came out positioned at 11:00 o'clock instead of 12. The dealer also wanted full price! Hopefully the store at the link will inspect them for such gross defects.
 
Mine arrived about 4 this afternoon. Very slimy with smelly oily greasy stuff everywhere, did a complete take down, cleaned and reassembled. I shot off a box of CCI Mini-mags then a box of CCI Std. Vel. no fail to feed, or fail to fires. Will make a good truck gun.
 
grelmar said:
The EE is a lousy place to find deals.

I picked up a Miroku SA-22 for $275 about 3 years ago at an online auction. If you're patient and keep your eyes open, you can generally find a deal. If you need something RIGHT NOW! it will end up costing more.

Sure, that may be almost double what the Norinco costs, but still not a high price for a decent quality gun that you don't have to mess with just to get it to work reliably. $159 is a terrible price for a gun that doesn't work out of the box. Even at minimum wage, your time is worth more than the price difference in time you'll put into screwing with the thing to get it to work right.
Click to expand...

What on-line auction?
 
Picked one of these up at the Chilliwack gunshow last weekend. Coated in Chinese oil, took it down to the last pin and cleaned, but that smell lingers... ran 150 rounds of Mini-mags, Wildcats, and CCI Quiets, all functioned perfectly (well, except for the Quiets, but I have yet to encounter a semi-auto that cycles them). All in all, a decent little gun, the wrist is very small, and it seems like it would carry easily. I got an extra barrel with mine (CanadaAmmo had a parts bin sitting there), so I think I'm going to try to scope up the one barrel, if I can find a mount that'll work. Anybody know what the barrel thread is on these? A suppressor would be ideal, but it might be fun to put a linear comp on or something...
 
CzyHorse said:
What on-line auction?
Click to expand...

Back before FB banned gun sales, on a running Canadian gun auction group on there.

But, in general, the EE doesn't have great deals, especially on things that have been sitting for a few days/weeks. If you keep a really close eye on it, you can luck out and catch things selling for reasonable prices, but those deals vanish fast.

Trolling gun shows, horse trading on word of mouth at ranges and a rural friends and family network, that's how you get deals, realistically. The EE is for "I want it now." Finding deals takes patience. Guns are no different than any other durable commodity, in this regard.
 
Lexthedestroyer said:
Picked one of these up at the Chilliwack gunshow last weekend. Coated in Chinese oil, took it down to the last pin and cleaned, but that smell lingers... ran 150 rounds of Mini-mags, Wildcats, and CCI Quiets, all functioned perfectly (well, except for the Quiets, but I have yet to encounter a semi-auto that cycles them). All in all, a decent little gun, the wrist is very small, and it seems like it would carry easily. I got an extra barrel with mine (CanadaAmmo had a parts bin sitting there), so I think I'm going to try to scope up the one barrel, if I can find a mount that'll work. Anybody know what the barrel thread is on these? A suppressor would be ideal, but it might be fun to put a linear comp on or something...
Click to expand...

I have a Belgian Browning 22 LR take down that cycles CB longs no problem
The Norincos are threaded for a 60A mount . you have to remove the rear sight
 
grelmar said:
Back before FB banned gun sales, on a running Canadian gun auction group on there.

But, in general, the EE doesn't have great deals, especially on things that have been sitting for a few days/weeks. If you keep a really close eye on it, you can luck out and catch things selling for reasonable prices, but those deals vanish fast.

Trolling gun shows, horse trading on word of mouth at ranges and a rural friends and family network, that's how you get deals, realistically. The EE is for "I want it now." Finding deals takes patience. Guns are no different than any other durable commodity, in this regard.
Click to expand...




Lots of good deals on the EE, only thing is they do not last long. Missed out on one last week Famae 542 6 mags, scope rail, folding stock adapter and a few other goodies for 2k
The seller was local, I was going to contact him in the morning when I finished my night shift. Too bad for me it was gone by the time my shift was done.
Good deals go fast, you have to be quick.
But hey if you think there are no deals on the EE feel free to stay away, less competition for the rest of us.

Just saying.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom