Bul Armory SAS II AIR vs STI Edge

A

Ag Driver

New member
Rating - 100%
13   0   0
Location
London, Ontario
I'm looking at buying a new Bul Armory SAS II AIR or a used STI Edge. I'm finding it difficult to read about any comparisons between the two. It seems as though you get more bang for your buck with a SAS and you pay more for the name for the Edge.

Of course sourcing mags will be a bit of a pain for the Bul, but once in hand it should be fine. I do worry about sourcing spare parts/replacement parts for the Bul. There would be no issues for an STI.

I'm also willing to have a SV bottom of the barrel built for 3k ... which would be tough I know, but I feel like this is doable.

Nonetheless, I'm after a 2011 and wondering if the SAS is worth going after for a new, 3k gun.
 
adamg said:
Where does one buy Bul? I thought those were from Europe.
Click to expand...

https://www.freedomventures.ca/products/firearms-hand-guns/bul-armory


rifleman338 said:
Bullseye also stock Bul pistols.
Click to expand...
Fixed it for you...

Since we became the exclusive importer of Bul pistols in 2018; Bullseye London has embraced the line; ordering lots of Bul pistols to put on their shelves.
I highly recommend them as a dealer for Bul.

Sure, you can also order direct from us, but in many cases; Bullseye has already cleaned us out.
Ken and Scott are simply awesome!
 
Last edited:
Ag Driver said:
Are parts and mags easy enough to order?
Click to expand...
We try to stock parts and mags; I'm pretty sure Bullseye ordered extra mags for stock too.
In the end; with an exception of a couple parts; they're 2011 / 1911s and since we are the biggest importer of 1911 parts in Canada; (EGW, Techwell, Dawson, STI, C&S, Bul, Tanfoglio, etc...) we should be able to hook you up.

Of our first two shipments, the only things we've had to replace so far under warranty were a sear and a broken recoil guide rod. The Buls are holding up.
 
Last edited:
Good thread, after lots of reading just last week on this same comparison (at least what I could find) I started saving up for the BUL as well. On schedule for 2021...
 
Freedom Ventures said:
We try to stock parts and mags; I'm pretty sure Bullseye ordered extra mags for stock too.
In the end; with an exception of a couple parts; they're 2011 / 1911s and since we are the biggest importer of 1911 parts in Canada; (EGW, Techwell, Dawson, STI, C&S, Bul, Tanfoglio, etc...) we should be able to hook you up.

Of our first two shipments, the only things we've had to replace so far under warranty were a sear and a broken recoil guide rod. The Buls are holding up.
Click to expand...

I just ordered a SAS SAW II in stainless from Bullseye. Will Freedom be bringing in some of the newer Bul products coming out? they have some real sweet race guns...
 
sharpee said:
I just ordered a SAS SAW II in stainless from Bullseye. Will Freedom be bringing in some of the newer Bul products coming out? they have some real sweet race guns...
Click to expand...
Besides a refresh in existing inventory, we have the Bullesteros and the Radical 5.4s and the Axe pistols on order. Delivery likely in late June.
 
Chilidip said:
Canadian MSRP on the Bullesteros?
Click to expand...

Approx. $6400-6800 depending on a couple options; includes the Nikko Stirling Red dot Sight and mount.
Final pricing should be on our website for the new products around late next week.

bullesteros7-1200x700.jpg
 
These are really nice guns - here is the SAWII i just bought from Bullseye. I'll be buying more BUL guns...

IMG_1401.jpg

IMG_1396.jpg

IMG_1398.jpg

IMG_1399.jpg

IMG_1394.jpg
 

Attachments

  • IMG_1401.jpg
    IMG_1401.jpg
    61.3 KB · Views: 311
  • IMG_1396.jpg
    IMG_1396.jpg
    41.3 KB · Views: 311
  • IMG_1398.jpg
    IMG_1398.jpg
    27.8 KB · Views: 309
  • IMG_1399.jpg
    IMG_1399.jpg
    53.1 KB · Views: 309
  • IMG_1394.jpg
    IMG_1394.jpg
    31.2 KB · Views: 309
You must log in or register to reply here.
Back
Top Bottom