Derya MK12, just buy one already! Lol

[airbatic]

The wear on the hammer and bolt release seem like very odd places and a lot for a new gun with 200 rounds....
Does anyone elses buffer look like that too?

 

[Jay]

The 'beat' buffer looks normal.

The wear on the hammer & the bolt release DO NOT look normal. Is the hammer smashing the bolt release?

Very curious what Odell will do once you show them this...

Cheers
Jay

 

[Moe]

I think that hammer is likely the issue. That buffer wear is normal. The bolt catch can take a little wear from the bolt hitting it but that is a bit much. The bolt catch however is not the cause of the misfires. I strongly at this point suspect the hammer.

Good luck and keep us informed.
Moe

 

[airbatic]

I'm not particularly impressed by the speed of Odells responses.....

 

[airbatic]

Got an email this am , they are sending a shipping label for me to return it for warranty work.

Just to add I went to the range with a friend and his mk12. His has way more rounds than mine and did not have any wear...including not on the buffer

 

[1ABNDT]

What magazines are you using, I remember seeing a video on YouTube with a guy explaining mag issues, and engaging the mag to hard into the magwell causing the mag to sit to high and interfer with the action during loading\unloading a round. I will try to find video and post but check for that. Just my .02

 

[Walnutz]

How could you NOT like it?

View attachment 262131

What stock is that? Thanks

 

[Jest4phun]

What stock is that? Thanks

Looks like a mft minimalist stock I got a couple love em.

 

[airbatic]

That's the stock one with the cheek riser removed...I did the same.




Update: Odell has mine and still waiting

 

[Jest4phun]

That's the stock one with the cheek riser removed...I did the same. Update: Odell has mine and still waiting

Huh it is huh, my bad minimalist been on my mind for a build for a while haha now I’m seeing things.

 

[Moe]

What magazines are you using, I remember seeing a video on YouTube with a guy explaining mag issues, and engaging the mag to hard into the magwell causing the mag to sit to high and interfer with the action during loading\unloading a round. I will try to find video and post but check for that. Just my .02

There is an easy fix for that. Just bend out the metal on the mag just below the bag catch opening.

Cheers
Moe

 

[doo925]

There is an easy fix for that. Just bend out the metal on the mag just below the bag catch opening.

Cheers
Moe

Any chance of getting a photo showing where you did the bend?

 

[Moe]

Any chance of getting a photo showing where you did the bend?

I will get on that and post pics tomorrow.

Cheers
Moe

 

[doo925]

I will get on that and post pics tomorrow.

Cheers
Moe

Got that picture yet Moe ?

 

[Moe]

Sorry had a significant auto accident that had me delayed.

Bend the spot indicated out.



Cheers
Moe

 

[doo925]

Thanks Moe. Hope the accident didn’t injure you

 

[cras111]

^^^ send me your gun, I will run 100 rds of slugs and buck through it!!!

I had to buy the aftermarket bolt release but yes after that very easy to throw one in the loading port and close the bolt

Derya 12 - I can’t close the bolt on empty magazine. Can you ?

 

[johnsks]

Derya 12 - I can’t close the bolt on empty magazine. Can you ?

derya mags No
uzkon mags Yes

 

[Moe]

Thanks Moe. Hope the accident didn’t injure you

Thanks. I am fine. The F150 and the 1200 Lb moose are done.

Cheers
Moe

 

[234h432]

Oh man I wasn't really planning on buying a shotgun but perhaps I will now. I like the steel and ice versions.

I am relatively new to guns and only have a piston AR-15. Out of curiosity what happens if you assemble this particular shot gun incorrectly? Or would that be relatively impossible, say there is a function test that would rule out any possible issues after reassembling. I have a slight fear of breaking things, probably just the lack of experience.